KIT Contents | Snapper 7600030 instruction

7600030 RIGHT FENDER SUPPRORT BRACKET KIT FOR SNAPPER / SIMPLICITY RZT ZERO-TURN RIDING MOWERS

WARNING

DO NOT attempt any adjustments, maintenance, repairs, or service with engine running. Stop engine. Engage parking brake. Remove key. Remove spark plug wire and secure wire away from spark plug. Engine, muffler and surrounding areas are extremely hot. Avoid serious burns; allow components to cool down before installing kit. Replace worn or damaged parts prior to operating. Use approved fuel container. DO NOT smoke near open fuel container. DO NOT fill fuel tank indoors or when engine is running. Allow engine to cool for at least ten minutes before refilling. Make sure that fuel cap is tightened securely. Wipe off any spilled fuel before starting engine.

KIT CONTENTS:

7300354 - RH FENDER SUPPORT BRACKET (1 QTY)	0-92126	- 1/4-20 CENTER LOCK NUT (1 QTY)
0-91585 - 3/8-16 CENTER LOCK NUT (1 QTY)	0-12080	- WIRE TIE (1 QTY)

STEP 1: Remove the three torx screws securing the control panel to the top of the right fender. Lifting the control panel slightly, remove the two inside clip nuts from the fender used to secure the two inside torx screws. See Figure 1.

REMOVE THESE

THREE SCREWS AND

LIFT CONTROL PANEL

STEP 3: Install the fender support bracket onto the bolts, securing with the 1/4-20 and 3/8-16 center lock nuts in place of the nylon lock nuts removed in Step 2. Tighten both nuts securely. Also secure the wiring harness to the noted hole with the supplied wire tie, to keep the harness from contacting the drive control rod. See Figure 3.

REMOVE THE CLIP

NUTS SECURING

THESE TWO SCREWS

FIGURE 1

FENDER

SUPPORT

BRACKET

SECURE WIRING HARNESS TO THIS HOLE WITH WIRE TIE

SECURE WITH SUPPLIED

CENTER LOCK NUTS

STEP 2: From under the right fender toward the front of the machine, remove the 1/4-20 nylon lock nut from the bolt securing the back end of the dampener. Also remove the 3/8-16 nylon lock nut from the bolt securing the twin stick pivot weldment. See Figure 2. NOTE: Do not remove the bolts.

REMOVE THESE TWO

NYLON LOCK NUTS

FIGURE 3

(Right fender removed for clarity)

STEP 4: Aligning the two inside holes in the control panel with the two holes in the top of the fender bracket, reinstall the torx screws removed in Step 1. Tighten the screws securely.

STEP 5: Check to make sure that all assembly steps have been completed and that all hardware is securely tightened.

ASSEMBLY IS COMPLETE

INSTRUCTION No. 7100662 (I.R. 3/2/2006)

FIGURE 2

TP 200-5167-IR-AT-SN

7600030 specifications

The Snapper 7600030 is a standout model in the realm of lawn care equipment, designed for homeowners seeking a reliable and efficient lawn mower that simplifies yard maintenance. This walk-behind mower seamlessly combines ease of use with robust performance, ensuring a well-manicured lawn with minimal effort.

One of the primary features of the Snapper 7600030 is its powerful 190cc Briggs & Stratton engine. This engine offers high torque and efficient fuel consumption, ensuring that the mower delivers optimal power for cutting through thick grass and tackling uneven terrain. The engine is also conveniently easy to start, meaning you can get to work without the frustration often associated with traditional pull-start mechanisms.

The Snapper 7600030 boasts a 21-inch cutting deck, which strikes the perfect balance between maneuverability and performance. The deck is crafted from durable materials that resist rust and ensure longevity, allowing for years of reliable service. With a 7-position height adjustment system, users can easily customize the cutting height, ranging from 1 to 4 inches, to accommodate various types of lawns and personal preferences.

Incorporating innovative technologies, the Snapper 7600030 features a rear-wheel drive system that enhances traction, making it easier to navigate through tough spots and around obstacles. This feature allows for tighter turning capabilities, which is particularly beneficial in smaller yards or when navigating around flowerbeds and garden paths.

The mower also offers a 3-in-1 cutting system, enabling users to choose between mulching, bagging, or side discharge options. This versatility not only allows for efficient grass management but also contributes to healthier lawns by returning nutrients to the soil when using the mulching feature.

Additional characteristics include a durable foldable handle, which facilitates easy storage and transportation, and a compact frame that enhances maneuverability. The Snapper 7600030 also emphasizes user comfort with cushioned grips and ergonomic design, reducing strain during prolonged use.

In summary, the Snapper 7600030 is a highly functional and user-friendly lawn mower that combines power, versatility, and durability, making it an ideal choice for homeowners looking to keep their yards in pristine condition. Whether it's a small urban garden or a larger suburban lawn, this mower delivers consistent performance, ensuring a neatly trimmed lawn with every outing.