Section 2 - OPERATING INSTRUCTIONS
2.4 STOPPING - ENGINE, WHEEL DRIVE, BLADE 2.4.4. PARK BRAKE
1.Engage park brake by depressing clutch/brake control pedal fully and pivot pedal forward to the locked position. Do not park machine on slopes. See Figure
2.5.CUTTING HEIGHT ADJUSTMENT
1. Adjust cutting height using cutting height adjustment lever. Depress latch release button located at the tip of the cutting height lever and move lever to desired cutting height. Release latch button. Try to move cutting height lever to ensure latch is fully engaged. See Figure 2.16.
WARNING
DO NOT park machine on slopes.
LATCH RELEASE BUTTON
CLUTCH/BRAKE PEDAL
HIGHER
CUTTING
HEIGHT
LOWER
CUTTING
HEIGHT
CUTTING
HEIGHT ADJUSTMENT LEVER
DEPRESS PEDAL FULLY &
PIVOT FORWARD TO LOCK
POSITION. PARK BRAKE IS
NOW ENGAGED.
FIGURE 2.14
2.Release park brake by pushing down on the clutch/brake pedal and rotate pedal rearward to the unlock position and release the pedal. See Figure
FIGURE 2.16
CLUTCH/BRAKE
PEDAL
PUSH DOWN & ROTATE
PEDAL REARWARD TO
RELEASE PARK BRAKE.
FIGURE 2.15
11