Snapper 381450HBVE manual Steering Assembly, Description, R. E. Rider Hydro Series

		STEERING ASSEMBLY
ITEM	PART NO.	DESCRIPTION
1	9-1315	WASHER, 5/16 Split Lock (2)
2	9-1297	NUT, 5/16-24 Hex, Grade 5 (2)
3	5-8078	WELDMENT, Steering Column
4	4-7106	COVER PLATE, Steering Column
5	4-6726	WELDMENT, Steering Shaft
6	1-0935	WASHER, 3/4” I.D. x 1-1/8” O.D. x 1/16” Thick Flat
7	1-0986	BEARING, Nylon
8	2-3671	COVER, Steering Shaft
9	7-2594	FOAM COVER, Steering Shaft (6-1/8” Long)
--	2-3667	FOAM COVER, Steering Shaft (8-1/4” Long)
10	5-1941	ASSEMBLY, Steering Wheel (Includes Item 18)
11	9-0364	PIN, 5/32 x 1” Cotter (2)
12	1-3862	PIN, 1/4 x 1-1/2” Roll
13	4-6956	CABLE, Throttle
14	2-3655	KNOB, Throttle
15	7-1921	RIVET, Plastic Snap
16	9-0913	SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx) (8)
17	9-1601	NUT, 5/16-18 Hex Flange Lock, Grade 5 (4)
18	2-3781	LOGO, Snapper (Steering Wheel)
19	2-6343	SWITCH, Ignition
20	9-0880	WASHER, 5/8” Internal Tooth Lock
21	1-2685	NUT, 5/8-32 Special Hex
22	1-1138	KEY (Pair)
23	2-6196	BEARING, .75 I.D. PM Flange
24	7-6978	NUT, 1/4-20 Hex Nyloc (2)
25	9-1508	BOLT, 5/16-18 x 3/4” Short Neck Carriage, Grade 5 (4)
26	7-2137	DECAL, Steering Column
27	9-1495	SCREW, 1/4-20 x 3/4” Hex Head Cap, Grade 5 (2)

R. E. RIDER (HYDRO) SERIES 0 & 1 MANUAL No. 06123

11