Snapper 18HP, 19HP manual Safety Icons, Safety Interlock System, Operational Safety Checks

Page 8

SAFETY ICONS

Warning: Read Operator’s

Manual.

Read and understand the Operator’s Manual before using this machine.

Danger: Thrown Objects.

This machine is capable of throwing objects and debris. Keep bystanders away.

Warning: Remove Key Before

Servicing.

Remove the key and consult techni- cal literature before performing repairs or maintenance.

Danger: Machine Rollover.

Operating on steep slopes can cause sliding and loss of steering, control and rollover. Do not use this machine on slopes greater than 10°.

Danger: Machine Rollover.

Do not operate on any slopes when wet or slippery. Do not operate near drop-offs or near water.

Danger: Dismemberment.

This machine can amputate limbs. Keep bystanders and children away when engine is running.

Danger: Dismemberment.

This mower deck can amputate limbs. Keep hands and feet away from blades.

Danger: Dismemberment.

This machine can crush and cut. Keep hands away from belts and pulleys.

Danger: Carbon Monoxide

Poisoning.

Do not operate the engine in an unventilated area.

Danger: Fire Hazard.

Keep unit free of grass, leaves and excess oil. Do not add fuel while engine is hot or running. Stop engine and allow to cool for 5 min- utes prior to adding fuel. Do not add fuel indoors, in an enclosed trailer, garage or other enclosed areas. Clean up spilled fuel. Do not smoke while operating this machine.

Safety Icons & Interlock System

SAFETY INTERLOCK

SYSTEM

This unit is equipped with safety interlock switches. These safety systems are present for your safety, do not attempt to bypass safety switches, and never tamp- er with safety devices. Check their operation regularly.

Operational SAFETY Checks

TEST 1 — ENGINE SHOULD NOT CRANK IF:

PTO switch is engaged, OR

Parking brake is not engaged, OR

Motion control handles are not in their NEUTRAL positions.

TEST 2 — ENGINE SHOULD CRANK IF:

PTO switch is NOT engaged, AND

Parking brake is engaged, AND

Motion control handles are locked in their NEU- TRAL positions.

TEST 3 — ENGINE SHOULD SHUT OFF IF:

Operator rises off seat with PTO engaged, OR

Operator rises off seat with parking brake disen- gaged, OR

Operator moves motion control handles out of their neutral positions before disengaging parking brake.

TEST 4 — BLADE BRAKE CHECK

The mower blades and mower drive belt should come to a complete stop within five seconds after the electric PTO switch is turned off (or operator rises off seat). If mower drive belt does not stop within five seconds, see your dealer.

NOTE: Once the engine has stopped, the PTO switch must be turned off, parking brake must be engaged, and the ground speed control handles must be locked in their NEUTRAL positions in order to start the engine.

WARNING

If the unit does not pass a safety test, do not operate it. See your authorized dealer. Under no circumstance should you attempt to defeat the purpose of the safety interlock system.

7

Image 8 Contents
Mower Decks 18HP Zero-Turn Riders20HP Zero-Turn Riders Table of Contents Safety Rules & Information Safety Rules and Information Slope OperationService & Maintenance Safe Handling of GasolineIdentification Numbers CE Identification TAG MarkingsNorth American ModelsSafety Decals Safety DecalsNorth American Models ALL ModelsOperational Safety Checks Safety IconsSafety Interlock System Choke Control FunctionsGround Speed Levers Throttle Control Features & Controls General Operating Safety Checks Before StartingOperation Starting the EnginePushing the Rider by Hand Stopping the Rider & EngineZero Turn Driving Practice Smooth TravelForward Travel Practice Reverse Travel PracticePractice Turning Around a Corner Executing an End-Of-Row Zero TurnExecuting TurnsTrailer Weight Recommendations Clevis Pin Clip Attaching a TrailerRemoval Mower Removal InstallationInstallation Regular Maintenance Before Every Spring Each Hours 100 250 Fall UseRegular Maintenance LubricationGrease OilService Interval Every 10 Hours or As Required Servicing the Mower BladesEngine Maintenance Check /FILL Transmission OIL Check Tire PressuresChecking / Adding Fuel Fuel FilterBattery Maintenance Cleaning the Battery and CablesTransmission OIL Filter Change StorageTroubleshooting, Adjustments, & Service Troubleshooting the RiderTroubleshooting, Adjustments, & Service Troubleshooting the MowerSeat Adjustments Speed Balancing AdjustmentGround Speed Control Lever Adjustment Seat Position AdjustmentNeutral Adjustment Cutting Height AdjustmentRoller BAR Adjustment Brake Adjustment Parking Brake AdjustmentFront Suspension Adjustment Select Models PTO Clutch Adjustment Blade Brake CheckMower Deck Leveling Orient Blades Side-to-SideRoller BAR Leveling If EquippedHydraulic Pump Drive Belt Replacement Battery ChargingMower Belt Replacement Mower Belt Tension AdjustmentDimensions EngineChassis TransmissionsTechnical Manuals Replacement PartsMaintenance Items HOW and When to WATER, FertilizeAerate HOW High to MOW the GrassProper Mowing Speed When and HOW Often to MOWLawn Care & Mowing Information