Dynacord 315 owner manual Hinweise gemäß EN 61000-3-22000, EN 61000-3-112000, EN

Page 23

Hinweise gemäß EN 61000-3-2:2000, EN 61000-3-11:2000, EN 55103-1:1997.

Dies ist eine Einrichtung der Klasse A. Diese Einrichtung kann im Wohnbereich Funkstörungen verursachen; in diesem Fall kann vom Betreiber verlangt werden, angemessene Maßnahmen durchzuführen und dafür aufzukommen.

Das Gerät unterliegt Sonderanschlussbedingungen. Das zuständige Elektrizitätsversorgungsunte rnehmen muß bestätigen, dass die Impedanz der Versorgung maximal 0,31 Ohm + j 0,19 Ohm ist. Das Gerät darf nur in der zulässigen Umgebung betrieben werden: Geschützte EMV-Umgebung (z.B. in Rundfunk- oder Aufnahmestudios) und Ausseneinsatz im ländlichen Bereich (in großer Entfernung von Eisenbahnstrecken, Funksendeanlagen, Hochspannungsfreileitungen usw.).

References in accordance with FCC, EN 61000-3-2:2000, EN 61000-3-11:2000, EN 55103-1:1997.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio com- munications. Operation of this equipment in a residental area is likely to cause harmful interfe- rence in which case the user will be required to correct the interference at his own expense.

This unit underlies some special connection conditions. The responsible electro utility company must confirm, that the impedance of the power line does not exceed 0,31 ohms + j 0,19 ohms. The unit may be operated only under special environment conditions: barriered EMC environments (e.g. broadcast and recording studios) and field use in country range (in large distance to railway lines, radio transmission plants, high-voltage overhead lines etc.).

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents PowerSub Inhaltsverzeichnis ContentsWichtige Sicherheitshinweise Herzlichen Glückwunsch BeschreibungQuickstart QuickstartLeft THRU, Right Thru BedienelementeLeft Input , Right Input Satellite Speaker Output Mode SwitchOver SUB LevelMains PowerPage Contents Important Safety Instructions Congratulations DescriptionQuickstart Left INPUT, Right Input Controls and IndicatorsOver Power Specifications Block Diagram Lite Aufbaubeispiele / Setup ExamplesClubs, Bars, Bistros Fullrange Page Hinweise gemäß EN 61000-3-22000, EN 61000-3-112000, EN Dynacord

315 specifications

The Dynacord 315 is a professional-grade loudspeaker designed to deliver high-quality sound for various applications, including live performances, installations, and events. Over the years, Dynacord has established itself as a leader in audio technology, and the 315 model is a testament to their commitment to innovation, performance, and reliability.

One of the main features of the Dynacord 315 is its powerful performance capabilities. With a maximum SPL (Sound Pressure Level) of 134 dB, this speaker is capable of filling large venues with clear, impactful sound. The 315 is equipped with a 15-inch heavy-duty woofer that provides deep, rich bass, while a high-frequency horn ensures that higher frequencies are reproduced with precision and clarity. This makes it an ideal choice for music genres that demand a full range of sound reproduction.

The Dynacord 315 also incorporates advanced technologies that enhance its performance and versatility. One such feature is the integrated DSP (Digital Signal Processing) that optimizes the speaker’s sound output based on the specific acoustic environment. This means that whether you’re using it in a small club or an outdoor festival, the 315 can adjust to deliver the best possible sound quality.

Another significant characteristic of the 315 is its rugged build. Built to withstand the rigors of touring and live events, the speaker features a durable cabinet made from high-quality materials. The design includes protective corner reinforcements and a rugged grille that helps prevent damage during transport and handling. Additionally, the lightweight construction allows for easy setup and transportation, making it a practical solution for sound engineers and performers.

Connectivity features also set the Dynacord 315 apart. It typically includes multiple input options, allowing users to connect various audio sources, from microphones to instruments and playback devices. This flexibility makes it a suitable choice for a wide range of applications, from small gigs to large-scale productions.

In summary, the Dynacord 315 stands out in the professional audio market with its powerful sound performance, advanced DSP technology, rugged construction, and versatile connectivity options. Its design reflects Dynacord's commitment to quality and innovation, making it an excellent choice for audio professionals seeking reliability and exceptional sound reproduction in challenging environments. Whether in the studio or on the stage, the Dynacord 315 promises to deliver the high standards expected from a leading audio brand.
Top Page Image Contents