Snapper 7101612 instruction

DEALER SET-UP INSTRUCTIONS for SNAPPER

21" CAST ALUMINUM REAR DISCHARGE WALK BEHIND MOWERS

This SNAPPER Walk Behind Mower uses a handle engine control bail system to kill the engine for the SAFETY of the operator. These mowers are designed for quick set-up. The checklist on Page 4 should be filled out by the dealer as the items are checked off and/or performed and the Consumer/Operator Product Registration card filled out and sent to the Customer Service department at SNAPPER when completed. CAUTION: Cutting blades are extremely sharp. Wear heavy leather gloves when handling or working with blades. Be careful to avoid cutting yourself on sharp edges of blade.

STEP 1: Remove unit from carton. Remove packing material from unit and unfold handles. Do this carefully to prevent cables from hanging up or becoming kinked.

STEP 2: The bolts attaching the lower handle to the handle brackets are for shipping purposes only. Remove those bolts, and insert two curved head bolts out through each handle bracket and lower handle tube, securing with internal lock washers and nylon lock nuts. Tighten securely. See Figure 1.

STEP 3: Remove the two shipping bolts (one each side) attaching the upper handle to the lower handle. Replace each with a curved head bolt, inserting out through each side, and securing with an internal lock washer and a plastic T-knob nut. Tighten securely. See Figure 1.

STEP 4: Secure control cables along each side of handle assembly with four cable clips, positioning them as shown in Figure 1. Make sure that cables are set into relief loops in cable clips. Once clips are installed, make sure that all controls operate without binding.

BLADE CONTROL

CONTROL

KNOBS

RECOIL ROPE

HANDLE

OPERATOR

CONSOLE

FIGURE 2

UPPER

HANDLE

T-KNOB

NUTS

LOWER	CABLE CLIPS
HANDLE	(2 EACH SIDE)

	HANDLE BRACKETS

FIGURE 1

STEP 5: Pull blade control bail against handle and at the same time, pull engine rope handle and slip pull cord into rope guide located on handle. See Figure 2.

STEP 6: Install Operator Console onto upper handle with four 1/4-20 x 1/2” torx screws. Also, firmly press control knobs onto engine speed and ground speed control levers. (NOTE: Both knobs are identical.) See Figure 2.

STEP 7: Remove hairpin from cable mounting stud on back of wheel control lever. Slip ring end of cable onto stud, and replace hair pin. See Figure 3.

WHEEL

DRIVE

CONTROL

CABLE

RING END

UPPER

HANDLE

STUD

HAIR PIN

FIGURE 3

STEP 8: Tip mower back against the upper handle to gain access to cutting blade. Remove foam shipping block from cutting blade. This must be removed before starting the engine.

INSTRUCTION No. 7101612 (I.R. 8/21/2007) TP 300-5284-IR-WB-N

7101612 specifications

The Snapper 7101612 is a robust and versatile lawn mower designed to meet the demanding needs of both residential and commercial users. With its combination of powerful features, advanced technologies, and user-friendly characteristics, this mower stands out in the competitive market of outdoor power equipment.

One of the main features of the Snapper 7101612 is its impressive engine performance. Equipped with a reliable 163cc OHV engine, it delivers ample power to tackle tough grass and uneven terrains. The engine is designed for easy starting, ensuring that users can fire up the mower without hassle, even after extended periods of storage. The Snapper's engine is also engineered with fuel efficiency in mind, providing longer run times on less gas, which is economically and environmentally beneficial.

The adjustable cutting deck is another highlight of the Snapper 7101612. Featuring a 21-inch steel deck, it allows users to choose from multiple height settings, ranging from 1 to 4 inches, enabling customization depending on grass length and type. This versatility makes it ideal for various lawn conditions, ensuring a precise cut every time. The mower also includes a rear bagging system that collects clippings, making it easier to maintain a tidy garden and minimizing the need for clean-up after mowing.

One of the most user-friendly aspects of the Snapper 7101612 is its ergonomic design. The handle is adjustable, which accommodates users of varying heights and enhances comfort during operation. Additionally, the lightweight design of the mower makes it highly maneuverable, enabling users to navigate around obstacles with ease.

In terms of safety features, the Snapper 7101612 is designed with a blade brake system, which ensures that the mower stops quickly when the operator releases the handle. This significantly reduces the risk of accidents and promotes safe usage, particularly in residential settings where children or pets may be present.

Overall, the Snapper 7101612 combines power, efficiency, and ease of use, making it a reliable choice for anyone looking to maintain their lawn effectively. With its durable construction and thoughtful features, this mower is set to perform reliably for years to come, catering to both novice and experienced users alike.