PRE-OPERATION Checklist

Snapper has completed initial adjustments and performed operational tests prior to shipping the machine. Due to the possible effects of shipping, handling and storage, Snapper intends for all of the following items to be verified and necessary final adjustments made at time of setup. It remains good practice and is strongly recommended that all the items also be checked prior to placing the machine into service. It is very important that setup is verified and all operational tests completed and results are acceptable. After completing this form, sign and retain for future reference.

SET-UP CHECKLIST

_____ STEERING WHEEL and steering shaft assembled.

_____ TIE RODS connected.

_____ LUBRICATION of entire unit completed.

_____ OPERATOR’S SEAT installed and tightened and seat switch connected.

_____ FUEL TANK installed and fuel line connected.

_____ GRASS DEFLECTOR, MULCH COVER or CATCHER ADAPTER and assembly positioned, secured, checked.

_____ BATTERY activated and charged per instructions and installed into battery compartment on machine.

_____ TIRE inflated to proper Pounds per Square Inch (PSI). Front tire is 12 PSI and Rear tire is 12 PSI.

CUTTING BLADE & MOWER

_____ BLADE RETAINING hardware checked for proper tightness.

_____ BLADE TIP CLEARANCE inside lower edge of mower checked and corrected as needed.

_____ BLADE STRAIGHTNESS checked and adjusted as required.

_____ MOWER CUTTING HEIGHT settings checked and adjusted as needed (with tires properly inflated).

_____ MOWER SIDE TO SIDE level checked and adjusted as needed (with tires properly inflated).

_____ MOWER FRONT TO REAR setting checked and adjusted as needed (with tires properly inflated).

_____ BLADE LEVER checked and adjusted as required.

_____ BELT TENSION checked and adjusted as required.

_____ REVERSE LOCKOUT MECHANISM shifter will not go into reverse when blade pedals are depressed.

PRE-START CHECKS & SERVICES

_____ TIRES checked and inflated to correct pressures.

_____ ENGINE OIL level checked.

_____ DIFFERENTIAL check lubricant and add as needed.

_____ CHAIN CASE check lubricant and add as needed.

_____ YOKE ASSEMBLY checked for freedom of movement.

_____ FUEL added to tank and system checked for leaks. Refer to Engine’s Owner’s Manual for fuel specifications.

_____ BATTERY (not overfilled!) reinstalled and properly connected with red boot over positive terminal.

OPERATIONAL TESTS

_____ CHECK SEAT SWITCH for proper function

_____ INTERLOCK SYSTEMS checked to insure proper functioning.

_____ ENGINE STARTED and throttle control settings checked.

_____ IGNITION SWITCH checked to insure engine stops when turned to OFF position.

_____ PARKING BRAKE tested to insure proper operation.

_____ CLUTCH/BRAKE tested for proper operation and adjusted as required.

_____ BLADE STOPS in 3 seconds or less after releasing the blade pedal. Adjust blade brake as required.

_____ BLADE LEVER can be moved to OFF position with blade pedal depressed.

CONSUMER INFORMATION

SALE DATE

MACHINE MODEL

SERIAL NO.

Retailer's Name

Signature

Address _________________________ City

State

Zip

MACHINE WILL BE USED COMMERCIALLY? YES _________ NO

Purchaser's Name

Signature

Address _________________________ City

State

Zip

IMPORTANT: This form is to be retained for future reference regarding Warranty, proof of purchase, traceability for product

recall or service, etc. Complete the Product Registration Card immediately and mail to: Customer Service Department at SNAPPER, P.O. BOX 1379, McDonough, Georgia, 30253.

INSTRUCTION No. 7-5122 (I.R. 6/28/02)

7-5122 specifications

The Snapper 7-5122 is an innovative lawn mower designed for residential and commercial use, offering a blend of power, efficiency, and user-friendly features. This model stands out for its advanced engineering and is particularly suitable for homeowners who take pride in maintaining their lawns with precision.

One of the key features of the Snapper 7-5122 is its robust 7 horsepower engine. This powerful engine provides ample torque and reliability, ensuring that users can tackle even the toughest grass and uneven terrain with ease. The mower's cutting system incorporates a 21-inch steel cutting deck, which provides a clean and even cut. This deck size is ideal for navigating smaller yards while still being capable of handling larger areas without sacrificing performance.

The Snapper 7-5122 is equipped with a versatile height adjustment mechanism, allowing operators to choose from multiple cutting heights ranging from 1 to 4 inches. This adaptability ensures that lawns can be maintained to various specifications, whether users prefer a close cut or a longer grass finish.

Another noteworthy feature is the mower's self-propelled drive system, which enhances maneuverability and reduces fatigue during extended use. With a choice of speed settings, users can adjust the pace to match their walking speed and the specific requirements of their lawn.

In terms of technology, the Snapper 7-5122 employs an easy-starting system, which minimizes the hassle of starting the engine. This feature is particularly beneficial for those who may have difficulties with traditional pull-start mechanisms. Furthermore, the mower's design emphasizes durability, with a rust-resistant frame ensuring longevity even when exposed to the elements.

Additional characteristics include ergonomic handles designed for comfort, making it easier to operate for longer periods without discomfort. The foldable handle feature allows for efficient storage, saving space in garages or sheds.

Overall, the Snapper 7-5122 is a reliable and efficient choice for those seeking a high-quality lawn mower. Its powerful engine, adjustable cutting heights, self-propelled drive, and user-friendly features make it an excellent investment for all lawn care enthusiasts. Whether for manicuring a small garden or managing larger properties, the Snapper 7-5122 stands out as a dependable performer in the realm of lawn maintenance equipment.