Dynacord Professional Power Amplifiers System frequency response in Display, Remote functions

Page 21

RCM-26

loudspeaker cabinets and systems, factory presets are available with linear phase ‚brick-wall‘ FIR crossovers. These provide users wishing to tune the system themselves with a completely linearized frequency and phase response upon which to build.

system frequency response in Display

For DYNACORD loudspeaker cabinets, measurements of the frequency and phase response are already provided in the IRIS-Net. This data together with the filter, crossover and delay settings conducted in the RCM-26 can be displayed and taken into account by IRIS-Net. The superposition shows the actual frequency response of the loudspeaker cabinet.

Remote functions

Remote control of the power amplifier under IRIS-Net provides Power On / Standby switching and the programming of power-up sequences for the power amplifiers as well as level settings and the muting of

individual channels or channel groups. In the RCM-26, all parameters can be controlled in real time as well as stored in user memories, from which they can be retrieved and reloaded subsequently.

DSP functions

X-over:Linkwitz-Riley, Butterworth, Bessel

FIR Filters: zero latency processing, linear phase X-over

Master EQ: 6 filters per channel; PEQ,

lo-shelf, hi-shelf, hi-pass, lo-pass selectable

Channel EQ: 6 filters per channel; PEQ, lo-shelf, hi-shelf, hi-pass, lo-pass, all-pass selectable

Master delay : 2ms - 2000ms per channel

Channel delay: speaker alignment

Dynamics: compressor, limiter per channel

Protection: Advanced Digital Voice Coil Protection algorithms

Others: input routing, level, mute,

polarity, sine and noise generators, VU meter

21

Image 21
Contents More than 60 years of amplifiers experience Professional Power AmplifiersContents One Brand Fits All German Engineering Excellence History Milestones Echocord DRS-78 PowerMate Cobra PowerH Bosch Production System Quality with system Bosch Production SystemManufacturing Measurement HallManufacturing in Zhuhai, China ConcertSound, Touring, Club/Disco, ProSound, Network ·· H HI-end remote controllable power amplifiers PowerH SeriesFeatures PowerH Series PowerH Series Remote Control and IRIS-Net Digital Controller Modul for Power H Remote ControlRCM-26 FIR filters Supervision and diagnosisSystem frequency response in Display Remote functionsDSP functions Ultra Lightweight Premium Audio Performance Power Amplifiers Ultra light weight power amplifiers LX SeriesLX1600 LX2200 LX3000 LX Series Front Panel LX Series Live Music Concert Sound, Club/Disco, Commercial ·· CL CL Series Thoroughbred workhorses For the most demanding audio tasks CL SeriesFront Panel Retrofittable NRS 90268 kit, which is available as Live Music Concert Sound, Commercial ·· SL SL Series SL Series Solid all-rounders at a competitive priceLPN-Filter Multi Media, Club/Disco, Pro Sound, Commercial Network DSA Unique flexibility through VLD DSA Series Multi-ChannelDSA Series Multi-Channel RCM-810 Digital controller module RCM-810DSA Series Dual-Channel DSA Series Dual-Channel Power amplifiers for Challenging sound reinforcement PCL Series PCL Series Contractor line power amplifiersFront-to-rear cooling Numerous protective circuits Network, Live Safety ProSound Multi Media, Commercial DPA Series DPA Series Features DPA 4000 SeriesFeatures DPA 8000 Series Recommended Products / Application Technical specifications Signal to Noise Ratio, A-weighted Rated Output PowerLoad Impedance Maximum RMS Voltage SwingInput Sensitivity at rated Max. Single Channel OutputDamping Factor, 1kHz Max. Single Channel Output Power1100 W Max. Single Channel Output Power Dynamic-Headroom,IHF-A Output Noise, A-weightedMains Fuse 1800 W Power Consumption Power Bandwidth, THD=1%Maximum Midband Output CrosstalkMaximum Bridged Output Power Input Sensitivity, rated power, 1 kHzFrequency Response, ref kHz, 8 Ω load Signal Processing Remote Power On3400 W Max. Midband Output Signal to Noise Ratio S/N A-weightedChannels Max. RMS Voltage Swing Voltage Gain at 1 kHzGeneral PCL 1225T DPA 4000 Series Output Power in Bridged-Operation Maximum Output PowerDistortion @ 1kHz and Nom. Outp. Power Signal to Noise RatioDPA 8000 Series 50 V / 20 Ω 70 V / 39,2 Ω 100 V / 80 Ω Emea

Professional Power Amplifiers specifications

Dynacord is a renowned brand in the realm of professional audio equipment, particularly recognized for its high-performance power amplifiers. The Dynacord Professional Power Amplifiers are engineered to cater to a wide variety of sound reinforcement applications, from live events to installation in venues such as theaters, concert halls, and clubs.

One of the standout features of Dynacord amplifiers is their exceptional audio fidelity. With a focus on delivering crystal-clear sound reproduction, these amplifiers incorporate advanced signal processing technologies. Their ability to handle a wide frequency range ensures that every note, from deep bass to soaring highs, is reproduced with precision. This characteristic makes them ideal for both music and speech applications.

Dynacord amplifiers are designed for reliability and longevity. They are built with robust components that can withstand the rigors of continuous use, ensuring they perform consistently even in demanding environments. Moreover, the amplifiers feature sophisticated cooling systems that prevent overheating, allowing for extended periods of operation without compromising performance.

One of the key technologies utilized in Dynacord amplifiers is the DSP (Digital Signal Processing) capability. This technology enables users to fine-tune the sound to their specific needs, offering various presets and customizable settings. It allows engineers to adjust parameters such as EQ, delay, and crossover settings, facilitating optimal sound performance in any setting.

The user-friendly design of Dynacord amplifiers is another significant advantage. They often come equipped with intuitive interfaces that make setup and operation straightforward, even for those who may not be experienced audio professionals. Additionally, some models include remote control capabilities, enabling users to manage the system from a distance for added convenience.

Dynacord has also integrated power-efficient designs into its amplifiers. These amplifiers not only deliver high output power but do so while minimizing energy consumption, making them an environmentally friendly choice. Their class D amplification technology offers high power output with reduced heat generation, which contributes to their overall efficiency.

In conclusion, Dynacord Professional Power Amplifiers are a testament to high-quality engineering and innovative technology in the audio industry. With features like exceptional sound fidelity, robust reliability, advanced DSP capabilities, user-friendly interfaces, and energy-efficient designs, they are well-suited for a diverse range of professional applications, enhancing the audio experience in any environment. Whether for touring musicians or permanent installations, Dynacord amplifiers are a trusted choice for audio professionals seeking performance and durability.