Forward Motion

DECAL IDENTIFICATION

		FORWARD MOTION
		FAST SPEED
GROUND		(RABBIT)
SPEED		3rd TOP SPEED
DECAL
P/N 4-7158
		2nd MEDIUM SPEED
		1st SLOW SPEED
		(TURTLE)

(7)GROUND SPEED: Shows direction of movement and the ability to select one of three ground speeds by moving the lever. The number 3 (Rabbit) indicates the top speed, number 2 indicates the medium speed and the number 1 (Turtle) indicates the slowest speed.

HEIGHT

CONTROL

DECAL

P/N 2-8454

(8)HEIGHT CONTROL INSTRUCTION: Shows direction of movement of HEIGHT ADJUST HANDLE to select a change in height if cut from highest cutting height (clockwise) to the lowest height (counter- clockwise). Note that there is a total of eleven heights of cut.

EUROPEAN

COMMUNITY

DECAL

29776

(10)EUROPEAN PERFORMANCE: Maximum level of vibration measured at the operators hand is 23.4 m/sec2.

OPERATOR PRESENCE

CONTROL DECAL

P/N 2-9431

(11)OPERATOR PRESENCE CONTROL: Pull control against handle to start engine and blade. Release control to stop engine and blade.

	GROUND DRIVE
EUROPEAN NOISE	DECAL
CONTROL DECAL	P/N 2-9432
P/N 7-4135

(12) GROUND DRIVE: Pull lever against handle to engage drive. Release lever to disengage drive.

(9)NOISE CONTROL: This unit is certified to be within the 100 dBA sound power limit at the specified Engine RPM.

DECAL IDENTIFICATION