| DECAL IDENTIFICATION |
|
|
| FAST SPEED |
|
|
| (RABBIT) |
|
|
| 3rd TOP SPEED |
|
|
GROUND |
|
| EUROPEAN |
SPEED |
|
| COMMUNITY |
DECAL | 2nd MEDIUM SPEED |
| DECAL |
P/N |
|
| 29776 |
| 1st SLOW SPEED |
|
|
|
|
|
|
SLOW SPEED (TURTLE)
(7)GROUND SPEED: Shows direction of movement and the ability to select one of three ground speeds by moving the lever. The number 3 (Rabbit) indicates the top speed, number 2 indicates the medium speed and the number 1 (Turtle) indicates the slowest speed.
HEIGHT
CONTROL
DECAL
P/N
(8)HEIGHT CONTROL INSTRUCTION: Shows direction of movement of HEIGHT ADJUST HANDLE to select a change in height if cut from highest cutting height (clockwise) to the lowest height (counter- clockwise). Note that there is a total of eleven heights of cut.
EUROPEAN NOISE CONTROL DECAL 
74135
(10)EUROPEAN PERFORMANCE: Maximum level of vibration measured at the operators hand is 23.4 m/sec2.
OPERATOR PRESENCE
CONTROL DECAL
P/N
(11)OPERATOR PRESENCE CONTROL: Pull control against handle to start engine and blade. Release control to stop engine and blade.
(9)NOISE CONTROL: This unit is certified to be within the 100 dBA sound power limit at the specified Engine RPM.
(12)GROUND DRIVE: Located on the plastic grip of the wheel drive control lever. Pull lever against handle to engage drive. Release lever to disengage drive.
18