Section 2 - OPERATING INSTRUCTIONS
WARNING
DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
2.8INSTALLATION of DISCHARGE DEFLECTOR (Optional accessory on some models)
1.Remove front and rear nuts attaching recycling cover to deck. See Figure 2.10.
2.Install discharge deflector and secure to deck using hardware removed in Step 1. Slot in front edge of discharge deflector must be under nut as shown and both bolts protruding through holes in the side of the deflector. See Figure 2.11.
FRONT EDGE OF
DEFLECTOR UNDER
NUT
FIGURE 2.11
NUT
REMOVE NUTS
FIGURE 2.10
9