Snapper SPE1250K, SPE140KW, SPE150KH, SPE361, SPE481 Familiarization, Introduction, Nomenclature

SECTION 1 - FAMILIARIZATION

TRANSMISSION SHIFT

LEVER

TRACTION

OPERATOR’S LOCK LEVER PRESENCE

CONTROL (OPC)

R.H. TRACTION

LEVER

FUEL

CAP

BELT

COVER

COVER

RETAINING

KNOBS

REAR TIRES

DISCHARGE

DEFLECTOR

CASTER

WHEEL

ASSEMBLY

KEY SWITCH

OPERATOR’S

PRESENCE

CONTROL (OPC)

L.H. TRACTION

LEVER

ENGINE SPEED

CONTROL

STARTER ROPE

AIR FILTER

MUFFLER

DECK COVER

DECK

(36” SHOWN)

DECK HEIGHT

ADJUSTMENT SPACERS

FRONT TIRES

FIGURE 1.1

1.1 INTRODUCTION

This manual has been prepared for the operator’s of the SNAPPER PRO GEAR WALK BEHIND MOWER. Its purpose, aside from recommending standard operating procedures and routine service requirements, is to promote SAFETY through the use of accepted operating practices. Read, Understand and Follow the IMPORTANT SAFETY INSTRUCTIONS on Pages 2 & 3 of this manual and All SAFETY messages on the PRO GEAR WALK BEHIND MOWER and its attachments before operating. SNAPPER recommends returning the MACHINE to an authorized SNAPPER dealer annually for inspection and addition of any new devices which might upgrade the safety of the mower.

1.2 NOMENCLATURE

It is recommended that all operator’s of this equipment become thoroughly familiar with the controls, components, and operation of this machine before operating. Specific details involving the engine are found in the separate engine owner’s manual. Study these manuals before operating and keep both handy for future reference. For the nearest SNAPPER dealer in your area, check the yellow pages under the heading LAWN MOWERS. For engine parts and service, look for the engine manufacturer’s dealers under the heading, ENGINES - gasoline.

5