Section 4 - REPAIR & ADJUSTMENTS
! | WARNING | ! |
DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug wire and secure away from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
4.6.REAR COVER REMOVAL & INSTALLATION
1.To remove rear cover, remove six threaded fasten- ers securing rear cover to machine, and lift cover from machine. See Figure 4.11. Set components aside.
2.To install rear cover, place cover onto rear of mower, aligning holes in cover with holes in mower. Secure cover to mower with threaded fasteners. See Figure 4.11.
THREADED
FASTENERS (6)
REAR COVER
FIGURE 4.11
18