Section 4 - ADJUSTMENTS & REPAIR
WARNING
DO NOT attempt any adjustments, maintenance, service or repairs with the engine running. Stop engine. Stop blade. Engage parking brake. Remove key. Remove spark plug wire from spark plug and secure away from plug. Engine and components are HOT. Avoid serious burns, allow all parts to cool before working on machine. Fuel Filler Cap and Vent must be closed securely to prevent fuel spillage.
4.3.1. MOWER DRIVE BELT ADJUSTMENT
The 33” and 38” mower deck drive belts do not require any adjustment. If the belt does not drive blade properly, replace belt as needed. Refer to Section “BELT REPLACEMENT”. Belt routing shown on this page. See Figure 4.2.
SPINDLE PULLEY | ELECTRIC CLUTCH PULLEY |
IDLER PULLEY
33” DECK
4.3.2.MOWER DRIVE BELT REPLACEMENT Inspect mower drive belt. Replace belt if signs of excessive wear and/or damage are present.
4.3.3.BELT REMOVAL
1.Remove foot rest. Refer to Section “FOOT
REST REMOVAL”.
2.Remove old belt.
4.3.4. BELT REPLACEMENT
1.Route new belt around electric clutch pulley. See Figure 4.3.
MOWER
BELTROUTE MOWER BELT AROUND ELECTRIC CLUTCH PULLEY
ELECTRIC
CLUTCH
VIEW SHOWN FROM UNDERNEATH
WITH DECK REMOVED, DECK REMOVAL
NOT NECESSARY FOR MOWER BELT
REPLACEMENT
FIGURE 4.3
SPINDLE PULLEY | SPINDLE PULLEY |
(Continued On Next Page)
IDLER
PULLEYSTATIONARY
PULLEY
ELECTRIC
CLUTCH
PULLEY
38” DECK
FIGURE 4.2
17