Snapper 1687262 Drill 11/32 Hole Here, Drill Hole In Boot New 11/32 Hole Existing Hole

Tube and Latch Kit Installation Instructions

Drill 11/32”

AHole Here

B

2“

C

Figure 5. Drill Hole In Boot

A.New 11/32” Hole

B.Existing Hole

C.Boot

CB

D

A

Figure 6. Install Puck to Boot

A.Boot

B.Puck, Metal

C.Capscrew, Thin Head, 5/16-18 x 3/4

D.Locknuts 5/16-18

4.Drill a new 11/32 hole (A, Figure 5) 2” from the exist- ing hole (B) in boot (C) as shown.

5.Secure the puck (B, Figure 6) to boot (A) using 5/16- 18 x 3/4 capscrew (C) and 5/16-18 locknut (D).

6.Remove and discard the latch (B, Figure 7) from the cover assembly (A). Remove and retain #10-24 x 5/8 screws (D) and #10-24 locknuts (C).

7.Install the new latch (B, Figure 8) to the cover assem- bly (A) securing with Existing #10-24 x 5/8 screws (D) and #10-24 locknuts (C) as shown.

C

A

B

D

Figure 7. Remove Latch

A.Cover Assembly

B.Latch

C.Locknuts, Nylock, #10-24

D.Screws, #10-24 x 5/8

C

A

B

D

Figure 8. Install Latch

A.Cover Assembly

B.Latch (New)

C.Locknuts, ESNA, #10-24 (Existing)

D.Screws, #10-24 x 5/8 (Existing)

3