Snapper ZF2200K, ZF2500KH manual Bushing

DECK DRIVESHAFT ASSEMBLY

ITEM	PART NO.	DESCRIPTION
1	1-2315	KEY, 1/4” Square x 2”
2	1-3864	FITTING, Lube (straight, for 3/16” hole)
--	1-3324	FITTING, Lube (45 degree, for 3/16” hole)
3	1-4409	BUSHING (2)
4	1-8504	BEARING, (includes item 25) (2)
--	1-4266	BEARING, 1” Bore (w/o collar) (2)
5	9-1810	BOLT, 3/8-16 x 1-3/4” Carriage, Grade 5
--	9-0990	BOLT, 3/8-16 x 2” Carriage, Grade 2
6	3-5530	DRIVE SHAFT, Deck (1” Diameter, 15 Spline)
7	3-5531	PULLEY, Double V (5.45 O.D., A Section)
8	3-5543	BELT, Deck Drive (HA 36.5) (2)
9	3-5713	SPRING, Tension
10	3-5816	PIN, 3/8-24 UNF
11	3-5867	FLAT IDLER, 2.75 O.D. x 1-1/4” Wide
12	4-2610	BEARING MOUNT (Weldment)
13	4-2626	IDLER ARM, Offset (Weldment)
--	4-2622	IDLER ARM, Straight (Weldment)
14	9-0776	SET SCREW, 1/4-20 x 1/4” Cone Point (2)
15	9-0954	SET SCREW, 5/16-18 x 5/16 Type C (2)
16	9-1298	NUT, 5/16-18 Hex Nyloc (6)
17	9-1299	NUT, 3/8-16 Hex Nyloc (5)
18	9-1508	BOLT, 5/16-18 x 3/4, Grade 5 (6)
19	9-1514	WASHER, 13/32 x 13/16 Flat
20	9-1518	NUT, 3/8-24 Hex Nyloc
21	9-1598	COTTER-PIN, 1/8 x 3/4”
22	9-1787	SCREW, 1/4-20 x 5/8”, Hex Flange Lock, Grade 5 (16)
23	2-7181	BOLT, 3/8-16 x 1-1/4” Carriage, Grade 5 (4)
24	9-1804	WASHER, 9/16 Flat
25	1-4265	COLLAR, Lock 1” (with 1/4” Set Screw)

OUT FRONT ZTR SERIES 0 MANUAL No. 06106

23