Eltax A-12.2R instruction manual Troubleshooting

Page 11

Troubleshooting

Symptom

Check

No sound

Subwoofer connected to the mains lead.

 

Power is ON.

 

Your unit is connected to the LINE IN (1) of

 

the sub-woofer.

 

Volume control (4).

 

Crossover (5).

11

Red LED not ON

Power switch is in ON position.

 

Subwoofer fuse.

 

Mains plug fuse.

Please note you may hear a tone from the subwoofer when the power are being switched OFF, this is normal and not a fault.

For your guidance.

Service

Before requesting service, please refer to the trouble-shooting guide above. To obtain service please contact your local dealer.

Image 11 Contents
12.2R Dolby Digital Dolby Pro LogicDolby Pro Logic Aktiv Subwoofer Atomic A-12.2R Sub UK Active Subwoofer Atomic A-12.2R SubActif Subwoofer Atomic A-12.2R Sub InstallationVolume Control DK Aktiv Subwoofer Atomic A-12.2R SubAvertissement AchtungPage Page Page Grün = „on, rot = „stand-by automatisch Troubleshooting Subwoofer Active A-12.2R