Snapper 1695163, 1733419 manual Safety Rules Information, Attachment Decal

Page 4

Safety Rules

& Information

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The

triangle in text signifies important cautions or warnings which must be followed.

GENERAL WARNINGS

Know the unit’s controls and how to stop quickly.

READ THE OPERATOR’S MANUALS.

Read and obey all safety decals.

Only allow responsible adults, who are familiar with the instructions, to operate the unit.

Disengage the PTO. Shut off the engine and wait for all moving parts to stop before attaching, adjusting, or disconnecting any part of the collection system.

Check the collection system to make sure it is bolted tightly to the unit.

DO NOT operate the unit without either the entire grass catcher or the deflector in place.

Turn off the PTO to disengage the blades when not mowing.

DO NOT mow in reverse unless absolutely necessary. Always look down and behind before and while travelling in reverse.

DO NOT turn sharply when travelling alongside a building or any object. Slow down before turning.

DO NOT carry passengers.

When collection system is removed from the mower deck, the deflector must be properly installed.

Collector bags are subject to deterioration and wear during normal use. Inspect the bag periodically for tears, holes, or weak spots and replace with a new

bag that meets manufacturer’s durability standards.

If the mower stalls or the collector chute plugs:

1.Disengage the PTO;

2.Stop the engine and remove the key;

3.Set the parking brake, and wait for all moving parts to stop.

4.Remove the foreign object or clear the chute

with a piece of wood before restarting the engine.

NEVER place hands into COLLECTOR OR MOWER housing to clear jammed objects. Blower OR MOWER may rotate when object is removed.

For added stability and to prevent tipping or loss of control:

a. Use reduced speed on uneven ground and when turning corners.

b. Reduce loads on hillsides. It is recommended that the collection system be kept only half full when negotiating any slopes. Start mowing on slopes when the collection system is empty.

c. Mow up and down the face of slopes; never across the face of any slope.

Never operate on slopes greater than 17.6% (10°).

SAFETY DECALS

This unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.

These labels are easily applied and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary for safe, effective operation.

Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effectively, we have placed several safety labels on the unit to remind you of this important information while you are operating your unit.

All DANGER, WARNING, CAUTION and instructional messages on your rider, attachments and mower should be carefully read and obeyed. Personal bodily injury can result when these instructions are not followed. The information is for your safety and it is important! The safety decals below are on your product.

If any decals are lost or damaged, replace them at once. See your local dealer for replacements.

TP 600-2562-01-AT-SMA

Attachment Decal

WARNING

Thrown objects hazard

• Objects thrown by the mower can seriously injure or kill you.

Do not open the hopper while the mower blades are turning.

Do not operate the mower without the complete

catcher in place.

1732819

Decal - WARNING

Thrown Objects Hazard

Part Number 1732819

Read and obey all operation and warning decals.

2

Image 4
Contents Clean Sweep Twin Catcher OPERATOR’S ManualPage Table of Contents Safety Rules Information Attachment DecalBefore Operation Mowing with the CatcherAfter Operation Storing The Grass CatcherInitial Installation Hitch InstallationBaffle Installation Baffle and Blade InstallationPuck Installation Component InstallationChannel Installation Install Channel Assembly Hitch PinCover Installation Bag, Chute and Tube InstallationInstall Latch & Hinge Install Discharge Tube Boot Seal Puck, Metal Wire Form SlitsNormal Removal & Installation Collector InstallationNormal Removal Collector Removal

1695163, 1733419 specifications

Snapper 1733419 and 1695163 are remarkable advancements in the realm of agricultural technology, particularly designed for enhancing the productivity and efficiency of farming practices. These models are engineered to meet the escalating demands of modern agriculture, offering a unique blend of power, precision, and versatility.

At the core of Snapper 1733419 and 1695163 is their robust engine technology. These models are equipped with high-performance engines that deliver impressive horsepower while maintaining fuel efficiency. The engines are designed to minimize emissions, aligning with contemporary environmental standards and promoting sustainable farming practices. This not only contributes to a greener planet but also reduces operational costs for farmers.

One of the standout features of these Snapper models is their advanced cutting systems. They incorporate precision cutting blades that ensure a clean and even cut, promoting healthier grass and enhancing the overall aesthetics of lawns and fields. The cutting height is adjustable, allowing users to customize the settings according to their specific needs, whether for a manicured lawn or a more rugged terrain.

Technologically, Snapper 1733419 and 1695163 boast innovative control systems that enhance user experience. These include easy-to-use interfaces that allow for quick adjustments on the go. Additionally, they feature ergonomic handles designed for comfort and reduced fatigue during long operational hours. Safety mechanisms are also integrated into the design, ensuring that users can operate the machines with peace of mind.

Moreover, these Snapper models exhibit exceptional durability and resilience. Built with high-quality materials, they are engineered to withstand the rigors of various weather conditions and terrain types. This ensures that the machines can perform consistently over time, making them a reliable choice for farmers looking for longevity in their equipment.

In summary, Snapper 1733419 and 1695163 stand out as versatile and efficient machines in the agricultural landscape. Their powerful engines, advanced cutting systems, user-friendly technologies, and robust construction make them indispensable tools for modern farmers. With these models, users can expect enhanced productivity, reduced operational costs, and a commitment to sustainable agriculture, setting them apart in a competitive market.