Snapper 1695169, 1733866 manual Safety Rules Information, Attachment Decal

Page 4

Safety Rules

& Information

Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. The trian-

gle in text signifies important cautions or warnings which must be followed.

GENERAL WARNINGS

Know the unit’s controls and how to stop quickly.

READ THE OPERATOR’S MANUALS.

Read and obey all safety decals.

Only allow responsible adults, who are familiar with the instructions, to operate the unit.

Disengage the PTO. Shut off the engine and wait for all moving parts to stop before attaching, adjusting, or disconnecting any part of the collection system.

Check the collection system to make sure it is bolted tightly to the unit.

DO NOT operate the unit without either the entire grass catcher or the deflector in place.

Turn off the PTO to disengage the blades when not mowing.

DO NOT mow in reverse unless absolutely neces- sary. Always look down and behind before and while travelling in reverse.

DO NOT turn sharply when travelling alongside a building or any object. Slow down before turning.

DO NOT carry passengers.

When collection system is removed from the mower deck, the deflector must be properly installed.

Collector bags are subject to deterioration and wear during normal use. Inspect the bag periodically for tears, holes, or weak spots and replace with a new bag that meets manufacturer’s durability standards.

If the mower stalls or the collector chute plugs:

1.Disengage the PTO;

2.Stop the engine and remove the key;

3.Set the parking brake, and wait for all moving parts to stop.

4.Remove the foreign object or clear the chute

with a piece of wood before restarting the engine.

NEVER place hands into COLLECTOR OR MOWER housing to clear jammed objects. Blower OR MOWER may rotate when object is removed.

For added stability and to prevent tipping or loss of control:

a. Use reduced speed on uneven ground and when turning corners.

b. Reduce loads on hillsides. It is recommended that the collection system be kept only half full when negotiating any slopes. Start mowing on slopes when the collection system is empty.

c. Mow up and down the face of slopes; never across the face of any slope.

Never operate on slopes greater than 17.6% (10°).

SAFETY DECALS

This unit has been designed and manufactured to pro- vide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.

These labels are easily applied and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary for safe, effective operation.

Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effec- tively, we have placed several safety labels on the unit to remind you of this important information while you are operating your unit.

All DANGER, WARNING, CAUTION and instructional messages on your rider, attachments and mower should be carefully read and obeyed. Personal bodily injury can result when these instructions are not followed. The information is for your safety and it is important! The safety decals below are on your product.

If any decals are lost or damaged, replace them at once. See your local dealer for replacements.

TP 600-2562-01-AT-SMA

Attachment Decal

WARNING

Thrown objects hazard

• Objects thrown by the mower can seriously injure or kill you.

Do not open the hopper while the mower blades are turning.

Do not operate the mower without the complete

catcher in place.

1732819

Decal - WARNING

Thrown Objects Hazard

Part Number 1732819

Read and obey all operation and warning decals.

2

Image 4
Contents Clean Sweep Triple Catcher OPERATOR’S ManualPage Table of Contents Safety Rules Information Attachment DecalBefore Operation Mowing with the CatcherAfter Operation Storing The Grass CatcherInitial Installation Initial InstallationTube Component Assembly Baffle InstallationComponent Installation Component InstallationInstall Upright Support & Bag Support Bracket Cover and Bag Installation Tube Installation Normal Removal & Installation Normal Removal InstallationCollector Installation Normal Removal Collector Removal

1733866, 1695169 specifications

Snapper 1733866 and Snapper 1695169 represent two noteworthy innovations in the world of turf management and landscaping equipment. Both models are designed to enhance the efficiency and effectiveness of lawn care, making them indispensable tools for professionals and DIY enthusiasts alike.

The Snapper 1733866 is a robust riding mower that boasts a powerful 14.5-horsepower engine, ensuring reliable performance across a variety of terrains. One of its standout features is the 33-inch cutting deck, which offers increased maneuverability and allows users to easily navigate around obstacles such as trees and flower beds. This model also incorporates a five-speed gear transmission, enabling operators to choose the speed that best suits their working conditions, whether they are cruising through open fields or tackling more intricate landscaping tasks.

The 1733866 is equipped with an innovative safety feature that automatically shuts off the engine if the driver leaves the seat without engaging the parking brake. This not only enhances user safety but also protects the mower from potential damage. Another significant aspect of this model is its ease of maintenance; the engine has quick-access points for oil changes and other routine checks, ensuring that the mower remains in optimum condition with minimal effort.

On the other hand, Snapper 1695169 is an exceptional self-propelled walk-behind mower. It features a powerful 159cc OHV engine, delivering ample power for tackling tough grass and overgrown areas. The Snapper 1695169 boasts a versatile 21-inch steel cutting deck with an adjustable height setting, allowing for tailored mowing experiences to achieve the desired lawn appearance. This model also incorporates a rear bagging system, enabling efficient collection of grass clippings for a cleaner finish.

Incorporating the latest in cutting technology, the 1695169 utilizes a dual blade system that ensures a precise and even cut. Additionally, its ergonomic handle design ensures comfort during long mowing sessions, reducing fatigue for the operator. The inclusion of a side discharge option provides even further versatility, giving users multiple grass management options for various lawn conditions.

Overall, both Snapper 1733866 and Snapper 1695169 offer distinct advantages tailored to their respective users, featuring advanced technologies and user-friendly characteristics. Whether one prefers the riding mower's ease of use and power or the walk-behind model's compact design and versatile functionality, Snapper continues to deliver products that meet the diverse needs of lawn care professionals and enthusiasts alike.