Initial Display Console Set Up | LG Electronics WS-2080 guide

3.4.1 Initial Display Console Set Up

Note: The sensor array must be powered and updating before powering up the console, or the console will timeout searching for the sensors. Perform this step last.

Make certain the weather station sensor array is at least 10’ away from the console and within 300’ of the console. If the weather station is too close or two far away, it will not receive a proper signal.

Insert two AA batteries into the battery compartment on the back of the display. After inserting the batteries into the console, all of the LCD segments will light up for a few seconds to verify all segments are operating properly.

The unit will instantly display indoor temperature, humidity, barometer, tendency, date and time. The wind speed, wind direction, rain, and outdoor temperature and humidity will update on the display within a few minutes. Do not Press any menu keys until the outside transmitter report in, otherwise the outdoor sensor search mode will be terminated. When the outdoor transmitter data has been received, the console will automatically switch to the normal mode from which all further settings can be performed.

If it does not update, please reference the troubleshooting guide in Section 9.

3.4.2 Radio Controlled Clock (RCC)

After the remote sensor is powered up, the sensor will transmit weather data for 30 seconds, and then the sensor will begin radio controlled clock (RCC) reception. During the RCC time reception period (maximum 10 minutes), no weather data will be transmitted to avoid interference.

If the signal reception is not successful within 1 minute, the signal search will be cancelled and will automatically resume every two hours until the signal is successfully captured. The regular RF link will resume once RCC reception routine is finished. In some locations, RCC reception may take a couple of days to receive the signal.

3.4.3 Sensor Operation Verification

The following steps verify proper operation of the sensors prior to installing the sensor array.

1.Verify proper operation of the rain gauge. Tip the sensor array back and forth several times. You should hear a “clicking” sound within the rain gauge. Verify the rain reading on the display console is not reading 0.00. Each “click” represents 0.01 inches of rainfall.

2.Verify proper operation of the wind direction. Align the wind vane pointer to North (as determined in Section 3.3). Verify the display reads North. Repeat for each quadrant (North, South, East, and West).

3.Verify proper operating of the wind speed. Rotate the wind cups manually or with a fan. Verify the wind speed is not reading 0.0.

4.Verify proper operation of the indoor and outdoor temperature. Verify the indoor and outdoor temperature match closely with the console and sensor array in the same location (about 10’ apart). The sensors should be within 4°F (2°C) (the accuracy is ± 2°F / 1°C). Allow about 30 minutes for both sensors to stabilize.

5.Verify proper operation of the indoor and outdoor humidity. Verify the indoor and outdoor humidity match closely with the console and sensor array in the same location (about 10’ apart). The sensors should be within 8% (the accuracy is ± 4%). Allow about 30 minutes

Version 1.10

Page 14

WS-2080 specifications

The LG Electronics WS-2080 is a powerful and versatile offering in the world of home appliances, specifically designed to enhance the living experience through its innovative technologies and user-friendly features. This model stands out for its blend of advanced functions and energy-efficient operation, making it an attractive choice for homeowners seeking reliable performance and convenience.

One of the main features of the WS-2080 is its impressive dual-zone temperature control system. This technology allows users to manage the temperature settings independently for different sections of the appliance, ensuring optimal preservation conditions for a variety of food items. Whether storing meats, vegetables, or dairy products, the WS-2080 delivers tailored cooling solutions, thereby helping maintain freshness and longevity for various groceries.

Energy efficiency is another highlight of the WS-2080. Equipped with an inverter compressor, this model not only reduces energy consumption but also operates quietly, providing a more serene home environment. The inverter technology adjusts the compressor's speed based on cooling demands, which means it can achieve the desired temperature quickly while reducing wear and tear on components, leading to lower upkeep costs.

The appliance also includes a smart storage system, featuring adjustable shelves and door bins. This flexibility accommodates larger items, providing users with the convenience of organizing their groceries according to personal preferences. The internal LED lighting enhances visibility, allowing for easy access to items, even in the back of the unit.

Moreover, the WS-2080 integrates advanced filtration technology that helps to eliminate odors and regulate humidity levels within the storage compartments. This feature is key to maintaining an optimal internal environment, ensuring that food items retain their natural flavors and freshness over time.

Additional conveniences include sleek, modern designs that fit seamlessly into contemporary kitchens and smart technology that offers app connectivity for remote monitoring and control. This functionality empowers users to check the status of their appliance, adjust settings, and receive alerts directly from their smartphones, adding a layer of convenience that is particularly appealing in today’s digitally-driven world.

Overall, the LG Electronics WS-2080 stands out as a robust, efficient, and user-friendly appliance that redefines kitchen convenience and food preservation, making it a worthy investment for any modern household looking to streamline their food storage solutions.