La Crosse Technology WS-9049 To Install and Replace Batteries in the Weather Station

Page 3

after 60 seconds, remove the batteries from both units and wait for at least 60 seconds before reinserting them.

4.The outdoor temperature and humidity data from the first transmitter (channel 1) and the signal reception icon should be displayed on the Weather Station. If this does not happen after 2 minutes, remove the batteries from both units, and then restart the process from step 1.

5.Insert the batteries in the second transmitter as soon as the signal reception icon and outdoor data are displayed on the Weather Station. Then within 2 minutes, the channel 2 outdoor data from the second transmitter and the "channel 2" icon should be displayed on the Weather Station. If this does not happen after 2 minutes, remove the batteries from both units, and then restart the process from step 1.

Note : You must insert the batteries into the second transmitter within 45 seconds after the Weather Station displays the information of the first transmitter.

9

necessary to remove the batteries from all units and start again the set-up from step 1.

Note:

∙If the signal reception is not successful on the first frequency of 915MHz for 45 seconds, the frequency is changed to 920MHz and the learning is tried for another 45 seconds. If it is still not successful the reception is tried for 45 seconds on 910MHz. This will also be done during re-synchronization.

∙When the weather station is receiving the WWVB time signal, the outdoor transmitter data signal will temporarily not be received by the weather station. During this short period of time, the outdoor readings shown on the weather station will not be renewed until the WWVB time signal is successfully received.

TO INSTALL AND REPLACE BATTERIES IN THE THERMO- HYGRO TRANSMITTER

The Thermo-Hygro Transmitter uses 2 x AA, IEC, LR6, 1.5V batteries. To install and replace the batteries, please follow the steps below:

1.Remove the cover.

2.Insert the batteries, observing the correct polarity (see marking).

11

6.Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are displayed on the Weather Station. Then within 2 minutes, the channel 3 outdoor data from the third transmitter will be displayed and the channel icon will shift back to "1" once the third transmitter is successfully received. If this does not happen after 2 minutes, remove the batteries from both units, and then restart the process from step 1.

Note: You must insert the batteries into the third transmitter within 45 seconds after the Weather Station displays the information of the first transmitter - or immediately after reception of the second transmitter is finished.

7.The distance between the Weather Station and the transmitter should not be more than 330 feet to ensure sufficient 915 MHz transmission. (See notes on “Positioning” and “915 MHz Reception”).

IMPORTANT:

Transmission problems will arise if the setup for additional sensors is not followed as described above. Should transmission problems occur, it is

10

3.Replace the battery cover.

Note:

When changing batteries in any of the units, all units need to be reset by following the setup procedures. This is due to a random security code assigned by the transmitter at start-up. This code must be received and stored by the Weather Station in the first 3 minutes of power being supplied to the transmitter.

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION

The Weather Station uses 2 x C, IEC LR14 1.5V batteries. To install and replace the batteries, please follow the steps below:

1.Insert finger or other solid object in the space at the bottom center of the battery compartment and lift up to remove the cover.

12

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Table of Contents FeaturesInventory of Contents Thermo-Hygro Transmitter Setting UPTo Install and Replace Batteries in the Weather Station Function Keys Battery ChangeReset About Wwvb Radio Controlled TimeLCD Screen Manual SettingsDaylight Saving Time ON/OFF Setting DST ON/OFF LCD Contrast SettingTime Zone Setting Time Reception ON/OFF SettingRelative AIR Pressure Value Setting Calendar SettingTemperature Setting AIR Pressure Unit Setting hPa / inHgAlarm Setting Weather Forecasting Icon Sensitivity SettingSnooze Setting and Stopping the Alarm To Exit the Manual Setting ModeSunny Cloudy with sunny intervals Rainy Indoor Relative Humidity and Indoor TemperatureComfort Level Indicator Toggling and Resetting the Indoor ReadingsWhen more than 1 transmitter used Weather Tendency IndicatorOutdoor Temperature and Humidity Data Toggling and Resetting the Outdoor DataChecking for 915MHz Reception LOW Battery IndicatorAbout the Outdoor Transmitter Positioning the THERMO/HYGRO TransmitterDimensions L x W x H SpecificationsCare and Maintenance Warranty

WS-9049 specifications

The La Crosse Technology WS-9049 is a multifunctional weather station designed for enthusiasts and everyday users alike. This device combines advanced technology with user-friendly features to provide accurate and reliable weather information right at home. One of the key highlights of the WS-9049 is its various sensors that measure different environmental parameters, ensuring that users receive comprehensive data about their current weather conditions.

At the heart of the WS-9049 is its outdoor temperature and humidity sensor. This sensor allows users to monitor real-time temperature and humidity levels outside their home, giving them an idea of the current weather conditions. The device displays this information on a clear, easy-to-read LCD screen, which also shows additional data such as the date and time, making it a practical choice for any household.

The WS-9049 also features a wireless transmission range, enabling the outdoor sensor to communicate with the indoor display unit from a considerable distance. This functionality means that users can place the sensor in optimal locations outside their home, ensuring that they receive the most accurate readings possible. Additionally, the wireless transmission minimizes clutter, eliminating the need for unsightly cables.

Another standout feature of the La Crosse WS-9049 is its ability to record and display the daily high and low temperatures. This historical data is invaluable for users who want to track weather patterns over time or simply stay informed about fluctuations in their environment. Furthermore, the device supports an easy-to-read weather forecast icon, giving users a quick glance at what to expect in the coming hours.

The WS-9049 is powered by batteries, making it easy to set up anywhere without worrying about finding a power outlet. Its sleek design and compact size allow it to fit harmoniously into any home or office decor. Additionally, the unit comes with a durable casing designed to withstand various weather conditions, ensuring longevity and reliability.

In summary, the La Crosse Technology WS-9049 weather station is an impressive tool for anyone interested in monitoring weather conditions with precision. Its robust features, wireless technology, and user-friendly interface make it an excellent choice for both novice and experienced weather watchers. With this device, users can gain insights into their environment, helping them make informed decisions based on accurate weather data.
Top Page Image Contents