The bar graph indicates the air pressure history trend over the last 12 hours in 5 intervals: 0h, | - |
3h, -6h, -9h and -12h. The “0h” represents the current full hour air pressure recording. If the bars | |
are rising it means that the weather is getting better due to the increase of air pressure. If the bars go down, it means the air pressure has dropped and the weather is expected to get worse from the present time “0h“.
The air pressure is displayed numerically in relative or absolute values.
∙Press and release the SET button to switch from relative (rel) to absolute (abs).
POSITIONING
WEATHER STATION:
Table stand:
The weather station comes complete with a foldout stand that gives the option of table standing or wall mounting.
To wall mount:
1. Fix a screw into the desired wall, leaving the head extended out by about 0.2” (5mm).
2. Using the weather station hanging hole, carefully hang it onto the screw.
Note: Always ensures that the unit locks onto the screw head before releasing.
POSITIONING THE THERMOHYGRO TRANSMITTER:
To wall mount:
1.Secure the bracket onto a desired wall using the screws and plastic anchors.
2.Clip the transmitter onto the bracket.
Note: Before permanently fixing the transmitter wall base, place all units in the desired locations to check that the outdoor temperature reading is receivable. In event that the signal is not received, relocate the units or move them slightly as this may help the signal reception.
Place the sensor outside protected from direct sun and standing rain or snow. Under and eave or deck rail on the north side work well.
Note: The reception distance of the thermohygro transmitter may be affected by the temperature. At cold temperatures the transmitting distance may be decreased. Please bear this in mind when placing the transmitter.
BATTERY CHANGE
Replace the batteries in all units regularly to ensure optimum accuracy of these units.
∙ Do Not Mix Old and New Batteries
∙ Do Not Mix Alkaline, Standard, or Rechargeable Batteries
Please participate in the preservation of the environment. Return used batteries to an authorized depot.
SPECIFICATIONS
Indoor temperature |
Range: | 14.1°F to +139.8°F (“OF.L” displayed if outside this range) |
Resolution: | 0.2°F |
Accuracy: | +/- 2°F typically (between +32 and +122ºF) |
| +/- 5°F typically (less than +32ºF or higher than +122ºF) |
Indoor humidity |
Range: | 20%RH to 95%RH |
| (Display “- -“if temperature is OL.F; display “19%“if < 20% |
| and “96%” if > 95%) |
Resolution: | 1% |
Accuracy: | +/- 5%RH typically (between 35 – 80%RH) |
| +/- 7%RH typically (less than 35%RH or higher than 80%RH) |
Outdoor temperature |
Range: | -39.8°F to +139.8°F (“OF.L” displayed if outside this range) |
Resolution: | 0.2°F |
Accuracy: | +/- 2°F typically (between +32 and +122ºF) |
| +/- 5°F typically (less than +32ºF or higher than +122ºF) |
Outdoor humidity |
Range: | 1%RH to 99%RH |
| (Display “- -“if outside temperature is OF.L; display 1% if < 1% and 99% if |
| > 99%) |
Resolution: | 1% |
Accuracy: | +/- 3%RH typically (between 20 – 80%RH) |
| +/- 5%RH typically (less than 20%RH or higher than 80%RH) |
Air pressure
Absolute pressure range: 8.86 – 32.48 inHg
Resolution: | 0.01 inHg | |
Accuracy: | +/- 0.15 inHg typically (between 26.58 – 32.48 inHg at +50 - +86ºF) |
| +/- 0.24 inHg typically (between 26.58 – 32.48 inHg at +32 - +50ºF, +86 - +122ºF) |
Data checking intervals: | |
Indoor checking interval | :every 16 seconds |
Outdoor reception | :every 4 seconds |
Air pressure checking interval | :every 1 minute |
Transmission range | :up to 330 feet / 100 meters (open space) |
Power consumption (Alkaline batteries recommended): |
Weather station | :2 x C, IEC LR14, 1.5V |
Battery life cycle | :Approx. 24 months |
Temperature transmitter | :2 x AAA, IEC, LR3, 1.5V |
Battery life cycle | : Approx. 12 months |
Dimensions (L x W x H) | |
Weather station | :7.4” x 1.32” x 7.4” / 188 x 33.7 x 188 mm |
Temperature transmitter | :1.41” x 0.62” x 4.03” / 36 x 16 x 102.6 mm |
WARRANTY INFORMATION
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship.
This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center.
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd.
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination.
The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center.
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the following specified exceptions: (1) damage caused by accident, unreasonable use or neglect (including the lack of reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any accessory or decorative surface; (4) damage resulting from failure to follow instructions contained in your owner’s manual; (5) damage resulting from the performance of repairs or alterations by someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units used for other than home use (7) applications and uses that this product was not intended or (8) the products inability to receive a signal due to any source of interference.
This warranty covers only actual defects within the product itself, and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances.
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL, CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY. KEEP OUT OF CHILDREN’S REACH.
This warranty gives you specific legal rights. You may also have other rights specific to your State. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you.
Contact info for warranty or technical support | La Crosse Technology |
Contact Support: 1-608-782-1610: | 2817 Losey Blvd. S. |
| La Crosse, WI 54601 |
Product Info and Support: | Product Registration: |
www.lacrossetechnology.com/9257 | www.lacrossetechnology.com/support/register |
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without written permission of the publisher.
This handbook may contain mistakes and printing errors. The information in this handbook is regularly checked and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their consequences.
All trademarks and patents are acknowledged.
FCC DISCLAIMER
RF Exposure mobile:
The internal / external antennas used for this mobile transmitter must provide a separation distance of at least 20 cm (8 inches) from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."
Statement according to FCC part 15.19:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Statement according to FCC part 15.21:
Modifications not expressly approved by this company could void the user's authority to operate the equipment.
Statement according to FCC part 15.105:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
∙Reorient or relocate the receiving antenna.
∙Increase the separation between the equipment and receiver.
∙Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
∙Consult the dealer or an experienced radio/TV technician for help.
