Battery installation

D. Funnel-shaped top with battery compartment

Contains battery compartment and rainfall counting electronics

E. Battery compartment

Holds two AA-size batteries

F. Screws

Secure battery compartment cover

G. Built-in leveler

Allows leveling rain gauge on the surface

H. Bucket see-saw mechanism

Collects the rainfall in one of its containers and self-empties once full

I. Protective screen

Protects the rain gauge funnel from debris

•Unlock the funnel-shaped top on the rain gauge by turning both knobs on the sides in an anti-clockwise direction.

•Remove the funnel-shaped top lifting it off the rain gauge bucket.

•Remove 7 small screws from the battery compartment cover using a small Phillips screwdriver

•Insert 2 “AA” size alkaline batteries (not included), matching the polarities as shown in the battery compartment.

•Replace the battery compartment door and secure the screws.

•Insert the funnel-shaped top into the rain gauge bucket and secure it into place by turning the knobs clockwise.

•Press DOWN button either on the main unit control panel or handheld remote control. The rain reading (usually 0.00) will appear in the rain window of TE923W main unit display, instead of “ - - -“. Make sure you are aware that the rain gauge transmission interval is 183 seconds, so the reading will not appear