Product Overview, Battery Installation | Honeywell TE653ELW specs

and maintenance.

We recommend cleaning the remote sensor periodically, as the dirt and debris may affect sensor accuracy.

PRODUCT OVERVIEW

REMOTE TEMPERATURE & HUMIDITY SENSOR

FEATURES

•Remote data transmission to the main unit via 433 MHz frequency

•LCD displays temperature, humidity and channel

•Selection of the temperature display in Celsius or Fahrenheit

•Three (3) transmission channels selection

•Case can be wall mounted using built-in hanger

A. LED INDICATOR

•Flashes once when the remote sensor transmits a reading to the main unit.

•Flashes twice when battery power is low.

B.BATTERY COMPARTMENT

•Holds two AA-size batteries

C.RESET

•Resets all previous settings

D. CHANNEL SWITCH

•Selects the desired channel -1,2 or 3

E.WALL-MOUNT RECESSED OPENING

•Keeps the remote sensor on the wall

F.°C/°F SWITCH

•Selects the temperature display in Fahrenheit or Celsius

NOTE: Install the batteries; select the channel and temperature in °C or °F before mounting the sensor.

BATTERY INSTALLATION

•Remove the screws from the battery compartment with a small Phillips screwdriver.

•Set the channel 1 through 3. The switch is located in the battery compartment. Channel 1 is typically selected if only one remote sensor is being used.

•Install 2 “AA” size alkaline batteries (not included) matching the polarities shown in the battery compartment.

•Select the temperature unit in °F or °C by pressing °C/°F switch with a paper clip or similar tool

•Replace the battery compartment door and secure the screws.

•Secure the remote sensor in the desired location.

MOUNTING

•The remote thermo-hygrometer sensor can be placed on the flat surface or mounted on the wall in vertical position

•Use the wall mount hardware and screws when mounting the thermo-hygrometer sensor on the wall

PLACEMENT

•The remote thermo-hygrometer sensor should be placed in the area