Honeywell TE328ELW Features Main Unit, Remote Temperature Sensor, LED Indicator, Reset

FEATURES

MAIN UNIT

*Precise time keeping with daily clock updates

*Time display shows hours, minutes and seconds

*Calendar display with month and date

*US time zone settings

(Pacific, Mountain, Central & Eastern)

*Radio-controlled signal reception indicator

*User-selectable 12/24 hour time format

*Weekday displayed in 5 different languages- English, Spanish, French, German or Italian

*User-Selectable temperature display in ˚C or ˚F

*Indoor temperature display

*Remote temperature monitored from up to 3 locations via 433MHz frequency band (one remote sensor is included)

*3 barometric pressure trend indicators: Rising, Steady, Falling

*Weather forecast in 5 large graphic icons:

Sunny, Cloudy, Partly Cloudy, Light Rain, Heavy Rain

*Wall mount or desktop option

*Dual crescendo alarm with snooze

*Programmable low-temperature pre-alarm warns about icy or inclement weather conditions prior to regular alarm time

*LCD with blue backlight

REMOTE TEMPERATURE SENSOR

*Remote temperature transmission to the main unit via 433MHz signal

*Case can be mounted on the wall using built-in hanger

*100 feet transmission range without interference

*LCD display of measured temperature

*Temperature display unit (˚C or ˚F) selection

*Transmission channel selection

4 3 3 M H z W I R E L E S S			E
1
2	A
3			F
		RESET CHANNEL1 2 3˚C/˚F
	C		D
			B
THERMO – SENSOR

A LED INDICATOR

Flashes once when the remote sensor transmits a reading Flashes twice when battery power is low

Barometric Pressure Trend
Outdoor
Temperature
Trend
Outdoor
Temperature			CH
Display	MIN
Indoor	MAX
Temperature
Trend	IN
Indoor	AM
Temperature	PM
Display
Time	AM	M	D	PRE-AL
	PM		ZZ	w
				s

				Weather
				Forecast
				Remote
				Reception Icon
		CH		Channel
MIN				Number
MAX
				Time Zone
IN				Display
AM				Radio
PM				Reception Icon
				Weekday
PM	M	ZZ	w	Display
				Pre-Alarm
AM		D	PRE-AL	Indicator
			s

B BATTERY COMPARTMENT

Accommodates two AA-size batteries

C RESET

Resets all previous settings

D CHANNEL SELECTOR

Selects the desired channel before installing batteries

E WALL-MOUNT RECESSED HOLE

Keeps remote sensor on the wall.

F ˚C/˚F SWITCH

Weekday Alarm Time	Month Display Date Display	Battery Low	Single Alarm
		Indicator	Indicator
	4

Selects the temperature display in Fahrenheit or Celsius

5

BEFORE YOU BEGIN	BATTERY INSTALLATION
1. We recommend using alkaline batteries for main unit and	MAIN UNIT
remote sensor.	The Wireless Weather Forecaster uses 2 “AA” batteries (not
2. Avoid using rechargeable batteries.	included). When the LCD becomes dim or the respective
3. Insert batteries before first use, matching the polarity as	low battery indicator shows up on the indoor or remote
shown in the battery compartment.	temperature display, the battery replacement is required.
4. Always insert batteries in the remote sensor first.	To install or replace the batteries, please follow these steps:
5. Press RESET after each battery change, using a paper
	1. Remove the battery compartment door on the back of
clip or similar tool.
	the main unit.
6. During an initial setup, place the main unit as close as
	2. Insert 2 “AA” size batteries (not included) matching
possible to the remote sensor.
	the polarities shown.
7. After reception is established, position the remote sensor and
	3. Replace the battery compartment door.
main unit within the effective transmission range of 100 feet.
NOTE: 1. Avoid setting the time and date on the main unit	HOW TO USE THE TABLE STAND OR
before the remote temperature is displayed.
2. The effective operating range may be influenced	WALL MOUNTING
by the surrounding building materials and how	The main unit has a removable table stand, that supports
the receiver and transmitter are positioned.	it on a flat surface. The unit can also be mounted on the
3. Place the remote sensor so that is faces the main	wall using the recessed screw hole. The stand must be
unit (receiver), minimizing obstructions such as	removed prior to mounting. The remote sensor can be
doors, walls, and furniture	similarly mounted or placed on a flat surface.
4. Though the remote sensors are weather- resistant,	GETTING STARTED
they should be placed outdoors away from direct
sunlight, rain or snow.	1. After the batteries are installed, remote sensor will transmit
BATTERY INSTALLATION	the temperature readings at adout 45 second intervals.
	2. The main unit may take up 2 minutes to receive the
TEMPERATURE SENSOR	initial readings.
NOTE: Install the batteries; select the channel and temperature	3. Upon successful reception, the remote temperature will
unit (˚C or ˚F) before you mount the sensor	be displayed under the top line of the main unit LCD
1. Remove the screws in the battery compartment with	display, and the indoor temperature will be displayed
a small Phillips screwdriver.	below the remote one.
2. Set the channel. The switch is located in the battery
	4. The main unit will automatically update readings at
compartment. Channel 1 is typically selected if only 1
	45-second intervals.
remote sensor is being used.
	5. After the main unit finishes searching for the temperature
3. If you are using more than one sensor, select a
	signal from the remote unit(s), the WWVB time signal
different channel for each sensor.
	receiver will start searching for the atomic time signal.
4. Install 2 “AA” size alkaline batteries (not included)
	It takes about 5-8 minutes.
matching to the polarities shown in the battery compartment.
	If in 8 minutes the WWVB time signal has not been
5. Replace the battery compartment door and secure the screws.
	received, use the MODE button to set the time manually
6. Secure the remote sensor in the desired location.
	(see "setting the time and date manually" section.)
6	7