La Crosse Technology WS-8010U instruction manual Inventory of Contents, Quick SET-UP

INVENTORY OF CONTENTS

1.WS-8010U—Giant Radio Controlled Weather Center.

2.TX4U—Remote Thermo-Hygro (temperature-humidity) includes: mounting bracket/receptor, rain cover, and two mounting screws.

3.Instruction manual and warranty card.

ADDITIONAL EQUIPMENT (not included)

1.Three fresh 1.5V C batteries.

2.Two fresh 1.5V AA batteries.

3.Philips screwdriver.

4.Three mounting screws.

QUICK SET-UP

1.Insert two AA batteries into the Remote Thermo-Hygro.

2.Insert three C batteries into the Weather Center.

3.Wait 5 minutes for the Weather Center to receive remote signals from the Remote Thermo-Hygro sensor.

4.Wait an additional 10 minutes for the WWVB signals to be received. If the WWVB signal is not found in this time period, manually set the time (see complete instructions) or wait until the Weather Center conducts its nightly auto-search during the ideal reception time (12:00 am to 6:00 am).

5.Mount the units, ensuring that all units are sending and receiving signals.

DETAILED SET-UP GUIDE

I.BATTERY INSTALLATION

A. REMOTE THERMO-HYGRO SENSOR

1.Pull the cylindrical rain cover off the sensor.

2.Remove the battery cover (located on the backside of the sensor, above the mounting post and bracket). Press the arrow and push in the direction of the

Mounting

Bracket/Receptor

Rain Cover

Battery Cover

Thermo-Hygro Sensor

3