Dynacord Stereo System manual Determine the Acoustic Requirements

Page 15

preference? Getting this kind of information at the beginning will help to avoid confusion and delays at the installation stage.

Just as important as the human factors are the construction details of the site. How are the walls and ceilings constructed? What kinds of mounting surfaces will be encountered? Is the drop ceiling a lay-in type, or tongue-and-groove? Where must cabling be routed, and how accessible are those spaces? Do partition walls or bearing members extend above the drop ceiling, where they may obstruct cable runs? Is conduit or plenum cable required? All of these factors directly affect the price quote and the actual task of installation.

A key decision early on in evaluating the equipment requirements is what type of infrastructure the system should have. The decision will determine if a mixer amplifier is used for the installation or if the ProAnnounce digital matrix routing system is used. The key questions to ask consist of the following:

1.Are there more than 2 independent audio programs running simultaneously?

2.Are “zone specific” independent remote controls required for volume levels in each zone?

3.Is the ability to remotely switch program sources for a particular zone required in more than one zone?

4.Do voice pages and announcements need to be restricted to certain areas of the building?

5.Is remote off site control of the system a required feature?

6.Are the power requirements for the system greater than 600 watts?

If the answer to any one of these questions is yes there is a good possibility that the ProAnnounce digital matrix infrastructure is required. The additional cost for this system however is not that great. The typical premium for a ProAnnounce routing system is less than $1,200 for most installations over that of a “discrete” system design. In many cases there is no other viable solution to accomplish what the client wants.

Step 2 – Determine the Acoustic Requirements

When the basic infrastructure is established then a system acoustic layout can be done. This would consist of the following basic steps:

•Establishing required coverage areas

•Setting the acoustic volume (SPL) levels desired

•Establishing any esthetic or design requirements for the speakers.

•Estimating background noise levels for each zone.

•Determining the program material content to be run through each zone.

All this is done while taking into account the expectations of the client and the environment in which the system will be run. Is it a loud sports bar or a quiet elegant restaurant? Or is it a large open area of a hotel lobby and ballroom? Any of these needs can sway the final equipment selections.

At this point you need to determine the number of speaker appliances needed for the installation. This can be done using computer design tools such as the free EV Excel speaker calculator when using ceiling speakers or EASE which is a full scale acoustic modeling package.

Step 3 – Conduct a Preliminary Layout and “Walk Through”

The third step is to assemble the system design on paper and review the signal paths, amplifier power requirements and establish the basic functionality of the overall system design. This can be done with the aid of the ProAnnounce designer software if a pro announce based system is being employed. If a simpler system is used then often a basic charting package such as Visio is adequate to lay out the system.

ElectroVoice/Dynacord BGM Guide

Page 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Paging/Background Music Systems Disclaimer & Copyright Table Of Contents Analyzing the Application When To Specify Mixer/Amplifiers EV has ALL the Perfectly Positioned Products Business Audio BusinessElectroVoice/Dynacord BGM Guide Evid Surface Mount Speaker Systems EV Business Audio Product GuideEvid Ceiling Speaker Solution Why is it Different? Evid Ceiling Mount Speaker SystemsOutdoor Ready Construction EV Raw Frame Ceiling Speakers Evid 4.2, 8.2 and 8.2L Full Range Models with Punch10.1 Finally a Compact True Ceiling Subwoofer MA Series Mixer Amplifiers EV Amplification ProductsEV Commercial Power Amplifiers CPS Series Power AmplifiersPrimary Features Key CPS Amplifier Product Features ProAnnounce Digital Routing SystemOverview ProAnnounce DP Series Power Amplifiers Basic System ComponentsAudio Routing Made Easy What to Recommend? Basic Business Audio System Design GuideConduct a Preliminary Layout and Walk Through Determine the Acoustic RequirementsExpect The Unexpected Assemble the Equipment ListSelecting & Positioning Ceiling Loudspeakers Speaker SelectionStandardizing for Profitability Ceiling vs. Surface Mount SystemsCeiling Speaker Coverage An Example of Coverage Pattern vs. Speaker Size Converting Coverage Specs to a LayoutUse of Subwoofers When Controlled Coverage is NeededChoosing the Best Mixer/Amplifier Positioning Subwoofer ComponentsAnalyzing the Application When To Specify Mixer/Amplifiers DRM 4000 Mixer When the Job Calls For ProAnnounceDRM4000 vs. the DPM4000 DPM4000 4x4 Matrix RouterVolume And Tone Controls / Delays Signal Generators / Voice Message MemoryControl Inputs And Outputs Interfaces Clock / CalendarMonitoring MacrosUnderstanding DCS Expansion Options Station Control ConsolesDCS 400 Expansion Chassis BGM and Paging System DesignsRetail Store Single Zone BGM Installations System ExamplesLayout Overview Office Building 5 Zone Simplified systemQuipment List Bar-Restaurant 2 ZoneSpeaker Systems Health Club 4 ZoneProannounce Equipment Retail Clothing Store -2 ZoneRetail Bookstore Equipment List Retail Book/Record Store -3 ZoneLarge Department Store 6 Zone Basic Warehouse 5 Zone Speaker Systems Proannounce Equipment Multi-Use Warehouse, Factory & Office Facility 15 ZoneWhy Is It Called Constant Voltage? Appendix a Distributed Audio Systems a PrimerWhat Are the Advantages to Constant Voltage Systems? Single-Channel Direct Drive Amplifier BridgingUse of Autotransformers

Stereo System specifications

The Dynacord Stereo System is a remarkable audio solution designed for audiophiles and professionals seeking superior sound quality and versatility. Renowned for its exceptional engineering, Dynacord emphasizes clarity, power, and precision in all of its products, and this stereo system is no exception.

One of the standout features of the Dynacord Stereo System is its advanced digital signal processing technology. This allows for precise tuning of audio output, ensuring that users experience optimal sound quality regardless of the input source. The system includes various presets tailored for different environments, whether it’s a small room or a large auditorium. This flexibility makes it ideal for both personal and professional settings.

Another significant characteristic of the Dynacord Stereo System is its robust build quality. Constructed from durable materials, the system is designed to withstand rigorous usage, making it a reliable choice for mobile DJs, event organizers, or even studio applications. Additionally, the aesthetics of the system are both modern and stylish, fitting seamlessly into any décor.

The Dynacord Stereo System also features a powerful amplification system. With a high output capacity, the system delivers rich, dynamic sound that fills the space without distortion. It supports a wide frequency range, allowing users to enjoy everything from deep bass to crisp highs, making it versatile for various music genres.

Connectivity is another strong point of the Dynacord Stereo System. The system is equipped with multiple input options, including Bluetooth, USB, and traditional analog inputs, offering convenience for connecting various devices such as smartphones, computers, and instruments. The Bluetooth capability also allows for seamless wireless streaming, further enhancing its usability.

In addition to its audio performance, the Dynacord Stereo System includes user-friendly controls and settings. The intuitive interface allows for easy adjustment of volume, tone, and effects, making it accessible for users of all experience levels. Whether you’re a casual listener or a seasoned sound engineer, the Dynacord system caters to all.

In conclusion, the Dynacord Stereo System stands out with its exceptional sound quality, durable construction, versatile connectivity options, and user-friendly features. This system is not only designed to meet the needs of audio professionals but also aims to enhance the listening experience for everyone. Whether at home, a concert venue, or on the go, the Dynacord Stereo System delivers a powerful performance that truly elevates audio enjoyment.
Top Page Image Contents