Noaa, Getting Started, Installing the Batteries

D E S C R I P T I O N A N D F U N C T I O N S O F P A R T S

	B
A			D	E
A		C

A. NOAA

Change NOAA weather radio operation mode (Monitor/Standby/Mute/Off) and change for channels frequencies from 1 to 7

B. Up/Down volume (< vol >) button Adjustment to high or low volume at your desired

C.Radio

Change radio operation mode to (FM/AM/OFF) and change Alarm on/off function

D.Display/Snooze/Set (DISP/SNZ/SET)

-Change LCD display mode to (Alarm 1/Alarm 2/Calendar/Thermometer), and when alarm is activating, press once to enter snooze mode; and if weather alert is activating, press once to turn off the alert.

-Press and hold 2 seconds to enter SET mode for Alarm1/Alarm2/Time/ Calendar/12- 24/county code setting.

E.Store/Recall (STR/RCL)

Store and recall the radio station memories

F.Up/Down tuning (+/- tuning) button

Up/Down tuning for radio stations or selection of pre-set memory; and change of setting mode

G.Stereo headphone jack

H.AC/DC adapter jack

I.Detachable antenna

J.Detachable Belt-Clip

G E T T I N G S T A R T E D

GETTING STARTED

Before operation, please study the manual to get familiar with basic functions and features of the unit. The unit does not have an On/Off switch and the LCD will illuminate once the batteries are inserted. However, the radio can be set to NOAA-on, NOAA stand-by, NOAA-mute, or NOAA-off positions.

Note: Keeping the radio permanently on, will consume substantially more power. Subsequently, NOAA stand-by is recommended when the user is not listening to radio broadcasts.

O P E R A T I O N G U I D E

INSTALLING THE BATTERIES

The unit uses 3 x AA 1.5V alkaline batteries.

1.Gently push toward to open the battery door

2.Flip-up the battery door and insert with new batteries strictly according to the polarities shown

3.Replace the battery door

DISPLAY MODES

There are three lines of display indications:

1 st line displays clock

2 nd line displays variables Alarm 1/Alarm 2/Temperature/Calendar by pressing (DISP/SNZ/SET) button

3 rd line displays radio station frequencies, pre-set memory, and NOAA channel indicator when channel is being set.

Note: Before setting any data, please note that if no data is input within 15 seconds, the original data will resume on the display.

HOW TO SET THE ALARMS

ALARM 1

1.Press and hold (DISP/SNZ/SET) for 2 seconds (to set ALARM 1 mode)

2.Press Up/Down (+/- tuning key) to set Hour

3.Press (STR/RCL) once to ﬂash minute

4.Press Up/Down (+/- tuning key) to set minute

5.Press (RADIO) to activate/deactive the alarm (“The bell” symbol appears in the display when the alarm is activated).

6.Press (DISP/SNZ/SET) once to return to normal