Eton FR600RDS owner manual Select, Reception of Event Codes

SOLARLINKFR600RDS OWNER’S MANUAL

4)Press <SELECT> shortly once to enter the county code setting mode (MULTI, SINGL or ALL), which blinks in the display.

5)If you don’t know your county code, select ALL with or and press <SELECT> and then <MENU> TO EXIT. If you know your code, don’t press SELECT and go to the next section.

6)Press  or  shortly to select MULTI or SINGL and press

<SELECT>.

7)Press <SELECT> shortly again to enter the code. CODE 01

XXXXXXappears in the display, with 01 flashing.

8)Press <SELECT> again and the first digit of six starts flashing. Press or  to set the first digit and then press to go to the second digit, doing this again and again until all six digits are entered.

9)If you’re in SINGL, press <SELECT> and then <MENU> to exit. If in MULTI, go to the next step.

10)If you’re in MULTI and wish to enter more codes, press

<SELECT>.

11)01 flashes. Press or  to go to another code setting number (1-23 flashes) and press <SELECT>.

12)The first digit of six flashes, use or to set it and press to enter the next number, doing this again and again until all six digits are entered.

13)Press <SELECT> to choose another code number (1-23) and when your finished press <SELECT> and then MENU to exit.

RECEPTION OF EVENT CODES

Your radio can receive ‘event code’ information during weather alerts. These codes are identified at http://www.nws.noaa.gov/os/ eas_codes.shtml.

Canadian Weather Alerts are addressed at: http://www.msc-smc. ec.gc.ca/cd/brochures/warning_e.cfm#top.

18