Esoteric X-03 owner manual Discs, Type of discs that can be played on this system

Page 7

Discs

Type of discs that can be played on this system

This player can playback discs bearing any of the following logos:

Audio CD:

• 12cm or 8cm discs

• Linear PCM digital audio Audio CDs are divided into tracks.

Super Audio CD:

• Single layer, dual layer or Hybrid layer

• 12cm or 8cm discs

• Digital audio (DSD)

Super Audio CDs are divided into tracks.

About CD-R/CD-RW

CD-R/RW discs recorded in Audio CD format and finalized correctly are playable. But depending on the quality of the disc and/or the condition of the recording, some CD-R & CD- RW discs may not be playable.

Caution:

<If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

<Unfinalized CD-R/CD-RW discs cannot be played.

Following discs cannot be played with this unit:

DVD, CD-G, Data part of CD-EXTRA, PHOTO CD, CD-ROM and DVD-ROM discs

illegally produced discs

scratched or damaged discs

discs that are dusty, soiled or marked with fingerprints

Warning:

If you attempt to play back such discs, there is a risk that sudden loud noise can blast over the speakers at full volume and cause damage to the speakers and your hearing.

Copy-protected discs, DualDiscs and other discs that do not conform to the CD standard may not play back correctly in this player. If you use such discs in this unit, TEAC ESOTERIC COMPANY cannot be responsible for any consequences or guarantee the quality of reproduction. If you experience problems with such non-standard discs, you should contact the producers of the disc.

<Always place the disc on the disc tray with the label side up. (Compact discs can be played or recorded only on one side.)

<To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges.

How to remove the disc

How to hold the disc

<Should the disc become dirty, wipe the surface radially (from the center hole outward towards the outer edge) with a soft, dry cloth:

<Never use such chemicals as record sprays, antistatic sprays or fluid, benzine or thinner to clean the discs. Such chemicals will do irreparable damage to the disc’s plastic surface.

<Discs should be returned to their cases after use to avoid dust and scratches that could cause the laser pickup to “skip.”

<Do not expose discs to direct sunlight or high humidity and temperature for extended periods. Long exposure to high temperatures will warp the disc.

<Do not play any disc that is warped, deformed or damaged. Playing such discs may cause irreparable harm to the playing mechanisms.

<CD-R and CD-RW discs are more sensitive to the effects of heat and ultraviolet rays than ordinary CDs. It is important that they are not stored in a location where direct sunlight will fall on them, and which is away from sources of heat such as radiators or heat-generating electrical devices.

<Printable CD-R and CD-RW discs aren’t recommended, as the label side might be sticky and damage the unit.

<Do not stick papers or protective sheets on the discs and do not use any protective coating spray.

<Use a soft oil-based felt-tipped pen to write the information on the label side. Never use a ball-point or hard-tipped pen, as this may cause damage to the recorded side.

<Never use a stabilizer. Using commercially available CD stabilizers with this unit will damage the mechanisms and cause them to malfunction.

<Do not use irregular shape CDs (octagonal, heart shaped, business card size, etc.). CDs of this sort can damage the unit:

<If you are in any doubt as to the care and handling of a CD- R/CD-RW disc, read the precautions supplied with the disc, or contact the disc manufacturer directly.

7

Image 7
Contents Super Audio CD/CD Player For U.S.A Important Safety InstructionsContents Coreless motor with neodymium magnets FeaturesLink Audio terminal Unsurpassed design and featuresAudio DACs Word synchronizationConventions about this manual Placement of the unitBefore Use What’s in the boxType of discs that can be played on this system DiscsFollowing discs cannot be played with this unit Digital audio device CD recorder, MD deck, etc Wall socket ConnectionsStereo amplifier Master clock generator G-0s, etcAnalog audio output terminals Word sync connectorSignal GND connection Power cord receptacleDisplay Front panel featuresUnderstanding the remote control unit Battery Replacement Remote Control UnitRestoring factory settings How to insert the batteriesOpening and closing the tray Pausing playbackPlayback Stopping playbackSelecting the playback area Skipping playbackSelecting a track Fast scanningDisc repeat Repeat modeAnalog output 2CH/MULTI Track repeatFinish the programming by pressing Play Programmed playbackAdding tracks to the list Use the FL Dimmer button to cycle between these settingsDisplay dimming Clearing the last track from the listClock Mode Changing the display modePCM Link Audio Output SettingOFF default 60958Data transfer rate How to connect multiple i.LINK-capable devicesLink Ieee Copyright protection system DtcpExit the setup menu by pressing Setup once more Settings introductionUse the cursor buttons to navigate the menus Settings Setup Menu Chart Settings Speaker Setup Settings Audio SetupSelect Test Start and press the Enter button Speaker distanceSpeaker levels SP Level Test tone length Test toneMaintenance TroubleshootingBeware of condensation Specifications Dimensions Teac Esoteric Company

X-03 specifications

Esoteric X-03 is a cutting-edge digital-to-analog converter (DAC) that represents the pinnacle of audio engineering and technology. Designed for audiophiles and music enthusiasts, the X-03 is built to deliver an exceptional listening experience, showcasing the intricacies of music with remarkable detail and fidelity.

One of the standout features of the Esoteric X-03 is its dual-mono construction, which minimizes crosstalk and ensures an optimally balanced audio output. This architecture allows for the separation of left and right channels, providing a clearer and more spacious soundstage. The high-performance DAC chips used in the X-03 are capable of handling a wide range of audio formats, including high-resolution PCM audio and DSD (Direct Stream Digital), making it a versatile choice for modern music consumption.

The X-03 employs proprietary technology, such as the Esoteric Clock Jitter Reduction system, which effectively minimizes timing errors that can deteriorate audio quality. By maintaining impeccable timing during playback, this technology ensures that the music retains its dynamic range and tonal accuracy. Furthermore, the DAC features a robust power supply design, including multiple isolated power transformers that cater specifically to digital and analog sections, reducing noise and providing stable performance.

In terms of connectivity, the Esoteric X-03 offers a comprehensive range of inputs including USB, balanced XLR, and RCA, accommodating various audio sources. The USB input supports PCM audio up to 32-bit/384kHz and DSD256, allowing users to tap into the highest quality digital audio files available.

The user interface of the X-03 is intuitive, featuring a bright display that provides essential information while allowing for easy navigation through various settings and inputs.

In conclusion, the Esoteric X-03 is not just a DAC; it’s a robust audio tool designed for those who appreciate the subtleties of sound. With its advanced technologies and meticulous design, the X-03 delivers a remarkable listening experience, ensuring that every note and nuance is captured and reproduced with precision. It stands as a testament to Esoteric's commitment to excellence in high-end audio equipment, making it a cherished component for any serious audio system.