Acu-Rite 589 In-1 Sensor Installation Guidelines, Clear Data Collected During Installation

Page 10

3-in-1 Sensor Installation Guidelines

INSTALLATION HEIGHT Mount the sensor at least 5 feet (1.5 meters) off the ground (higher is better for wind measurement) in an open area. Secure to fence post, 2”x4” wood, 3/4” pole, etc. (not included)

LEVEL INSTALLATION Use a bubble level (not included) to ensure level installation for accurate wind measurement.

Top or Side Mount

Top Mount

Side Mount

1.

Insert the mounting base into the

 

 

 

hole on the bottom of the sensor.

 

 

2.

Use one of the screws included

 

 

 

in the hardware bag to fasten

 

 

 

the lower sensor housing to the

 

 

 

mounting base.

 

 

3. Fasten mounting base to a post or railing using 2 screws.

Pole Mount

1.Insert pole (we recommend 3/4” schedule 40 PVC / 25.8 mm O.D., not included) or similar item all the way into the hole on the bottom of the sensor. Note: Mounting base is not used.

2.Use one of the screws included in the hardware bag to fasten the lower sensor housing securely to the pole.

The 3-in-1 sensor is now ready to use.

Pole Mount

Do not install during electrical storms. Do not place pole or sensor near electrical lines or electrical equipment.

Clear Data Collected During Installation

When installation is complete, clear erroneous data from the display unit by pressing the “CLEAR RECORD/RESET” button for each category, on the back of the display inside the battery compartment.

Basic Setup is Complete

The 3-in-1 sensor will now synchronize with the display unit. It may take a few minutes for synchronization to complete. If both or one of the units appear to be functioning improperly, please refer to the troubleshooting section.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Weather Center Package Contents Unpacking InstructionsTemperature & Humidity Sensors Features & BenefitsMounting Bracket B-C Switch not shown Display Unit Current Indoor Temperature Current Outdoor TemperatureSensor Low Battery Indicator Average Wind Speed Display Low Battery Indicator Current Indoor HumiditySet the A-B-C Switch IN-1 Sensor SetupInstall or Replace Batteries Display Unit Setup Plug Power Adapter into Electric OutletSet the Time, Date & Units Display Backlight SettingsTemperature Units ºF or ºC Pressure Units inHg or hPaDisplay Unit Placement Placement for Maximum AccuracyImportant Placement Guidelines In-1 Sensor PlacementBasic Setup is Complete In-1 Sensor Installation GuidelinesClear Data Collected During Installation Top or Side MountWeather Forecast Using The Weather Center Learning ModeMulti-Variable History Chart Wind SpeedReplay Historical Data Weather SelectToday’s High Month’s High All Time High Possible Solution TroubleshootingInaccurate forecast Problem Possible Solution HumidityDisplay Unit Care Care & MaintenanceCalibration In-1 Sensor CareSpecifications FCC InformationLimited One Year Warranty Customer SupportPage Page It’s more than accurate, it’s

589 specifications

The Acu-Rite 589 is a sophisticated digital weather station designed for everyone from casual weather enthusiasts to serious meteorologists. This model offers a host of features that make monitoring local weather conditions both easy and accurate.

One of the defining features of the Acu-Rite 589 is its advanced temperature and humidity sensors. It boasts precise, real-time readings of both indoor and outdoor conditions. The outdoor sensor unit can measure temperature from -40°F to 158°F and humidity levels from 1% to 99%, making it highly effective in various climates.

The device utilizes Acu-Rite's patented self-calibrating technology, which ensures that the weather data it displays is based on 14 years of historical weather data specific to your location. This means that users receive highly accurate and localized weather forecasts. The digital display screen features a sleek and user-friendly interface, making it easy to read temperature and humidity at a glance. It also includes a weather forecast icon based on changing weather patterns, allowing users to prepare better for upcoming conditions.

In terms of connectivity, the Acu-Rite 589 can connect wirelessly to other Acu-Rite devices, such as additional sensors for monitoring wind speed and rainfall. This feature significantly enhances the overall weather monitoring experience and provides a comprehensive snapshot of local conditions.

Another notable characteristic of the Acu-Rite 589 is its illumination feature, which makes it easy to read in low-light conditions. The display can be backlit, providing visibility even at night. The built-in alarm system allows users to set alerts for specific temperature or humidity thresholds, ensuring they are promptly informed of changing conditions that may affect comfort or safety.

Durability is another key feature, as the Acu-Rite 589 is designed to withstand various environmental conditions. The outdoor sensors are weather-resistant, ensuring reliable performance across seasons.

Overall, the Acu-Rite 589 is a versatile and feature-rich digital weather station that combines advanced technology with user-friendly design. Its accurate monitoring capabilities and various features make it an invaluable tool for anyone looking to stay informed about their local weather.
Top Page Image Contents