Acu-Rite 2027 instruction manual Replace Intelli-Time Battery

Page 13

Replace Intelli-Time Battery

Intelli-Time technology is powered by a pre-installed coin-cell battery that stores the time and date settings. The battery has a shelf life of several years. To replace the Intelli-Time battery:

1.Locate the coin cell battery compartment door on the back of the display unit, inside the battery compartment. Unscrew and remove the compartment cover.

CR2032

3V

2.Insert 1 x CR2032 coin cell battery into the battery compartment, as shown. Install battery with “+” positive terminal facing OUT.

3.Screw in the battery cover.

13

Image 13

Contents Weather Station ContentsUnpacking Instructions Package ContentsOutdoor Sensor Display Unit Features & BenefitsPlug-in for Power Adapter B-C Switch Battery Compartment Reset ButtonBattery Compartment Cover not shown Back of Display UnitSet the A-B-C Switch Sensor SetupInstall or Replace Backup Batteries optional Display Unit SetupIntelli-TimeClock Display Backlight SettingsSet the Time, Date & Units Display Unit Placement Placement for Maximum AccuracyOutdoor Sensor Placement Important Placement GuidelinesMoon Phase Using the Weather Station Learning ModeWeather Forecast Barometric PressureOutdoor TroubleshootingOr humidity Calibration Care & MaintenanceReplace Intelli-Time Battery FCC Information Specifications877 221-1252 info@chaney-inst.com Customer SupportIt’s more than accurate, it’s

Related manuals

Manual 16 pages 45.11 Kb