Display Unit Setup, Install or Replace

Display Unit Setup

1	Install or Replace	into the battery compartment,
1	Backup Batteries (optional)	as shown. Follow the polarity
	AcuRite recommends high	(+/–) diagram in the battery
	AcuRite recommends high	compartment.
	quality alkaline batteries in the	compartment.
	display unit for the best product	3. Replace the battery cover.
	performance. Heavy duty or
	rechargeable batteries are not	2 Plug in Power Adapter
	recommended.	2 Plug in Power Adapter
	1. Remove the battery	For the best performance, plug

	compartment cover.	in the power adapter as the main
		power source for this product.
	2. Insert 3 x AA alkaline batteries

1	Install Backup Batteries
	(optional)

3 AA batteries

2 Plug in Power Adapter

IMPORTANT: Batteries are a backup power source to preserve records in the event of a power outage. Power adapter is recommended as the primary power source to enjoy the full functionality of this product.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.