3-in-1 Sensor Installation Guidelines
INSTALLATION HEIGHT Mount the sensor at a minimum height of 5 feet (1.5 meters) off the ground, in an open area. Higher is better for wind measurements - the National Weather Service recommends 33 feet high!
MOUNTING OPTIONS The included mounting bracket is designed to screw directly onto wooden posts or surfaces that are 2”x4” or larger. The sensor can also be mounted directly to 3/4” steel or
PVC pipe (available at hardware Top MountSide Mount stores and home centers).
LEVEL INSTALLATION Use a bubble level (not included) to ensure level installation for accurate wind measurement.
Top or Side Mount
1. Insert the mounting base into the hole on the bottom of the sensor.
2. Use one of the screws included |
| |
in the hardware bag to fasten |
| |
the lower sensor housing to the |
| |
mounting base. | Pipe Mount | |
3. Fasten mounting base to a post | ||
| ||
or railing using 2 screws. | Do not install during | |
| ||
| electrical storms. | |
| Do not place pipe | |
| or sensor near | |
Pipe Mount | electrical lines or | |
electrical equipment. | ||
1. Insert pipe or similar item all the way |
| |
into the hole on the bottom of the sensor. |
| |
Note: Mounting base is not used. |
|
2. Use one of the screws included in the
hardware bag to fasten the lower sensor housing securely to the pipe.
The
Basic Setup is Complete
The
10