Cub Cadet Zero-Turn Commercial Riding Mower service manual Specifications

Page 8

SPECIFICATIONS

Engine:	25HP Kawasaki, & 27HP Kohler
Type:	Vertical air cooled V-Twin

Air Cleaner:	Paper Element

Lube System:	Pressurized with oil filter

Starter:	12-volt electric

Traction Drive:	Engine to two variable-speed hydraulic wheel motors on each
	drive wheel

Hydraulic Tank:	10 quart capacity, One quart filter

Cutter Deck;Drive:	60" Belt Driven

Clutch:	Electric

Deck Lift:	Hand lever w/pin lock for height adjustment

Cutting Height:	1-1/2" to 5"

No. of Blades	3, belt-driven, power take-off from engine

Controls:	Engine ignition and start switch; throttle; choke; left and right
	steering levers; electric blade clutch switch; parking brake; mower
	deck lift

Parking Brake:	Mechanical linkage attached to the brake handle

Front Caster Wheels:	13 x 6.50 x 6

Tire Pressure:	8-10 psi Rear, 20-25 psi front caster

Drive Wheels:	24x12 - 12

Frame:	2" Steel square tube and plate, all welded construction

Seat:	Adjustable seat with armrests. 5" Adjustment

Fuel Tank:	Two 6.5 gallon w/individual shutoff valves
Ground Speed:	0-10 + MPH forward. 0-4 MPH reverse

Instrumentation	Hour meter, Tachometer, Maintenance-minder

Net Weight:	1090 lbs. w/60" deck

8

Image 8

Contents Hydrostatic Zero-Turn Commercial Riding Mower Table of Contents Forward Models Listed in this ManualGeneral General Safety OperationsSafety Precautions When Mowing Related to FuelOperator Protection System Safety Decals and Labels Shield Missing do not OperateSpecifications Operating Instructions When MowingSafety Awareness when Mowing To Mow Grass and Produce a Striped Pat- tern Figure Fuel Shutoff Valve Initial Adjustments Check the fluid levels and tiresZero Turn Break-In And Operating Procedures Lubricate all fittings listed in the mainte- nance sectionOrientation Initial OperationStart the Engine Maintenance Service Mower DeckParking the Mower Removing the Mower DeckChanging a Blade Changing the Blade Drive BeltsChanging the Spindle Assembly Stop the engine and remove the key from the ignition switchHydraulic Oil Adding Hydraulic Oil use SAE20WBattery Removal Installing the BatteryElectrical Circuit Specific Gravity Freezing Temp FPage Tires Inflation PressureHydraulic Oil Tank and Filter BrakesHydraulic System Storage Maintenance Schedule OIL Chart If Mower is so equippedHigh Speed Tracking Adjustment Enginge RPM Check and AdjustmentLap Bar Adjustment Deck Corner Ball Wheel Roller SettingsDeck Center Anti-Scalp Roller Settings Deck leveling Procedure Wiring Diagram Maintenance Record Maintenance Record Maintenance Record MANUFACTURER’S Limited Warranty Turf Equipment