Cub Cadet G1336, G1332 To Changethetransmission Drivebelt, To Change Either Traction Drive Belt

Page 12

MAINTENANCE

Figure 6

d.Slip the long blade drive belt off of the pulleys.

e.(48" ONLY) Loosen the idler pull rod which holds the idler pulley tight against the short blade drive belt. (Item K, Figure 8.)

f.Remove the short blade drive belt from the pulleys.

g.Place a new short blade drive belt back on the pulleys and tighten the idler pull rod to hold the idler pulley tight against the belt.

h.Place a new long blade drive belt through the belt guide and loop it around the engine pulley and then around the two deck pulleys. The belt’s back side should ride on the idler pulley.

i.Replace the cap screw, lock washer and nut in the idler pulley arm.

j.The idler pulleys should be adjusted so that when the blade clutch is engaged, a ten-pound pull between two pulleys deflects either belt about 1/2". Do not overtighten these belts. The blade clutch should engage with only moderate force.

k.Replace the deck cover.

4.TO CHANGETHETRANSMISSION DRIVEBELT:

(See Figure 9)

a.Make sure the blade clutch is disengaged.

b.Working under the engine deck, take the long blade drive belt off of the engine pulley.

c.Loosen the locknut holding the transmission drive belt idler pulley in place and slide the pulley away from the transmission drive belt.

d.Remove the old belt and mount a new belt on the pulleys.

e.Slide the idler pulley back onto the belt and tighten the locknut holding it in place. The idler pulley should be adjusted so that a five-pound pull on the belt between the engine pulley and the transmission pulley deflects the belt about 3/16".

f.Replace the long blade drive belt on the engine pulley.

Figure 7

Figure 8

Figure 9

5.TO CHANGE EITHER TRACTION DRIVE BELT:

a.Remove the hex nuts which hold the belt guard in place. Remove the belt guard.

b.Place the neutral latch lever in the neutral lock position.

c.Remove the hairpin cotters from the two swivel joints which are inserted through the idler bracket and remove the swivel joints from the idler bracket.

12

Image 12
Contents Walk-Behind Commercial Rotary Mowers Index 10-14Foreword Safety Precautions When MowingGeneral Related To FuelSafety Decals Open Belt DriveN G E R Specifications Operating InstructionsInitial Adjustments Blade Clutch Manual and ElectricSteering Brake Levers Neutral Latch LeversOperating Instructions Cutting Height Adjustment Table MaintenanceGeneral Maintenance Daily Maintenance After MowingEngine Maintanence Mower MaintanenceTo Change a Blade See Figure To Sharpen a BladeTo Changethetransmission Drivebelt To Change Either Traction Drive BeltTo Change a Spindle Assembly To Adjust the LITE-TOUCH ManuallySuggested Mower Replacement Parts Suggested Engine Replacement PartsIncorrect Correct Date Work Performed Maintenance Record Maintenance Record Page MANUFACTURER’S Limited Warranty Turf Equipment

G1336, G1548, G1332 specifications

Cub Cadet has long been recognized for its commitment to quality and innovation in lawn equipment. The Cub Cadet G1332, G1548, and G1336 are three standout models in their lineup, each designed to enhance the user experience with their unique features, technologies, and characteristics.

The G1332 model is ideal for residential users seeking a reliable and high-performance mower. With a powerful engine, it delivers consistent cutting performance even in challenging conditions. Its 33-inch cutting deck allows for efficient mowing, making it suitable for medium-sized lawns. One of its standout features is the dual-blade system, which promotes a clean cut and provides superior grass mulching capabilities. The robust construction of the G1332 ensures durability, making it a dependable choice for homeowners.

On the other hand, the G1548 offers a larger cutting capacity with its 48-inch deck, making it perfect for larger properties or commercial use. This model is equipped with advanced features such as hydrostatic transmission, which allows for smooth speed changes without the need for gear shifting. The G1548's ergonomic design focuses on user comfort, featuring an adjustable seat and intuitive controls. Additionally, its mulching capability reduces the need for bagging, returning nutrients back to the lawn for healthier growth.

Meanwhile, the G1336 model combines power and precision with its 36-inch cutting deck. This model is particularly favored for its maneuverability, allowing users to navigate through tight spaces with ease. Equipped with a reliable engine and enhanced suspension, it provides a smooth mowing experience. The G1336 also boasts efficient fuel consumption, making it an environmentally friendly option while still delivering powerful performance.

All three models share several technologies that set them apart from competitors. The Cub Cadet SmartJet technology allows for efficient cleaning of the mowing deck, ensuring optimal performance and longevity. Furthermore, the inclusion of LED headlights on select models enhances visibility during early morning or late evening mowing sessions, increasing safety and ease of use.

In summary, the Cub Cadet G1332, G1548, and G1336 are exemplary machines that suit a wide range of mowing needs. Whether you're a homeowner managing a modest lawn or a professional tackling larger areas, these models provide reliable performance, innovative features, and the quality that Cub Cadet is renowned for. With advanced engineering and user-friendly designs, these mowers elevate the mowing experience, making lawn care more efficient and enjoyable.