Cub Cadet 53AJ8CTX750 service manual OIL Chart

Page 26

.

OIL CHART

Apply a few drops of engine oil or use a spray lubricant. Apply the oil to both sides of pivot points. Wipe off any excess. Start engine and operate mower briefly to insure that oil spreads evenly.

Number of Oil Points

Description

DAILY
4	Deck Suspension Pivots
4	Height Adjustment Turnbuckle Clevis Pin
2	Height Adjustment Handle Pivots
2	Height Adjustment Stop Pivots
2	Deck Lift Linkage Pivots
2	Transport Handle Pivots
1	Transport Handle Pin
2	Deck Frame Up-and-Down Pivots

WEEKLY

1Seat Hinge

2Steering Lever Linkage Rod End Bearings

2	Lever Return Assembly Rod End Bearings
2	Pump Control Lever Pivots
1	Brake Lever Pivot
1	Brake Lever Control Rod Ends
1	Brake Control Rod Ends

LUBRICATION CHART

Use a grease-gun filled with NO. 2 Multipurpose Lithium Base Grease

No. of Grease Fittings

Description

EVERY 25 HOURS
3	Blade Spindle Bearings
WEEKLY
2	Front Caster Wheels
2	Front Caster Wheel Spindles
4	Mowing Deck Pivots
2	Deck Take-Up Idler Pivots
1	Axle Pivot
2	Steering Lever Pivots
1	Hydro Take-up Idler Pivot
2	Mower Deck Ball Wheels

26

Image 26

Contents Hydrostatic Zero-Turn Commercial Riding Mower Table of Contents Forward General General Safety OperationsSafety Precautions Related to Batteries When MowingRelated to Fuel Towing Operator Protection System -FoldableSuspension Seat Safety Decals and Labels Shield Missing do not OperateSpecifications When Mowing Operating InstructionsSafety Awareness when Mowing To Mow Grass and Produce a Striped Pat- ternSteering Levers Initial Adjustments Check the fluid levels and tiresOrientation Zero Turn Break-In And Operating Pro- ceduresLubricate all fittings listed in the mainte- nance section Initial OperationPage Parking the Mower Mower Cutting BladesStart the Engine Removing the Mower Deck Maintenance ServiceMower Deck Changing a BladeSharpening a Blade Changing the Spindle AssemblyHydraulic Oil Adding Hydraulic Oil use Rimula SAE15W40 Stop the engine and remove the key from the ignition switchElectrical Circuit Draining Hydraulic OilSpecific Gravity Freezing Temp F Battery RemovalInstalling the Battery Jump StartingInflation Pressure TiresBrakes Bypass Valve Left Side Pump Hydraulic Oil Tank and FilterStorage To Put the Mower Back in Service Maintenance Schedule OIL Chart High Speed Tracking Adjustment Enginge RPM Check and AdjustmentLap Bar Adjustment Deck Corner Ball Wheel Roller SettingsDeck Center Anti-Scalp Roller Settings Deck leveling Procedure Wiring Diagram Page U.S.A Canada