Maintenance Schedule

a.Check the fuel level.

b.Check the engine oil level.

c.Check the hydraulic oil level.

d.Check the hydraulic hoses for leaks, abra- sion, kinks, twists, or a flattened condition.

e.Check the tires and tire pressure. Drive Tires: 8-10 psi.

Front Caster Wheels: 20-25 psi.

f.Check the spindle belt, the mower drive belt and the hydro drive belt.

g.Check the blades. Make sure they are sharp and that the blade securing cap screws are tight.

h.Check the cutting height.

2.When ready to start the engine:

a.Check the five safety switches for proper operation.

a.Clean the mower.

b.Clean the engine air screen.

c.Oil the wear points. Follow the Oiling Chart.

d.After the first five hours, Change the engine oil and engine oil filter.

B.Every 25 Hour Checks

1.Service the engine foam element air pre- cleaner.*

2.Grease the three spindle bearings.

1.Change the engine oil. (Every 25 hours under heavy duty operation.)

2.Clean or replace the engine’s paper air cleaner element.*

3.Check the battery’s electrolyte level.

4.Clean the engine cooling fins and external surfaces.*

5.After the first 500 hours, change the hydraulic oil and the hydraulic oil filter. Change them every 500 hours thereafter.

6.Oil wear points. Follow the Oiling Chart.

7.Lubricate all grease fittings. Follow the

Lubrication Chart.

1.Change the engine oil filter. (Every 50 hours under heavy duty operation.)

2.Check the engine spark plugs.

3.Check the air gap on the balde brake clutch (PTO Clutch) and if it exceeds 0.025” adjust to 0.012” - 0.015”.

Check the oil in the hydraulic reservoir.

*Perform maintenance more frequently under dusty conditions.

**Reference Engine Owner’s Manua