Attaching Chute Stop Bracket

•Remove the cutting deck from beneath the tractor (refer to instructions for Deck Removal in your tractor’s operator’s manual), then gently flip the deck over to expose its underside.

•Place a block of wood between the center deck housing baffle and the cutting blade to act as a stabilizer. See Figure 5.

•Use a 15/16" wrench to remove the hex flange nut that secures the blade to the outer blade spindle assembly. See Figure 5.

Hex Flange Nut

Wood Block

NOTE: An extra set of carriage bolt and lock nut have been supplied in your accessory kit. You may replace the old hardware for the chute stop bracket with these new ones, or save for later use.

	Lock Nut
	Remove this
	chute stop
A	Carriage Bolt
A	B

Install this chute stop

Deck

Chute Deflector

Spindle Assembly

Figure 5

WARNING: The hex flange nut has a right- handed thread pattern. Do not attempt to force the nut in an incorrect direction; it may damage the nut and create a safety hazard.

•Place a new blade on top of the outer blade spindle so that side of the blade with part number faces the ground when the mower is in the operating position.

•Secure with the hex flange nut removed earlier. Use a torque wrench to tighten the hex flange nut between 70 to 90 foot-pounds.

•Replace blade from the other outer blade spindle with the second blade from the bagger kit.

NOTE: The center blade spindle will continue to use the standard cutting blade already attached to the deck.

•Remount the cutting deck following instructions in the owner’s manual of the tractor.

•Remove the carriage bolt and lock nut holding the chute stop to the deck. See Inset A of Figure 6. Save the hardware.

•Replace with new chute stop bracket, from the bagger kit, at the same position on the deck. See Inset B of Figure 6. Secure with the hardware removed earlier.

Figure 6

NOTE: This chute stop bracket may stay on the unit even when the bagger is not being used.

Attaching Discharge Chute

•Raise the deck to its highest position.

•Raise the chute deflector on the deck and hold it while you position the discharge chute over the chute opening.

•Insert the hinge pin of the discharge chute into the tube on the chute stop bracket. See Figure 7.

•Rotate the chute around the deck so that its front edge fits snugly into the deck opening. Lower the chute deflector slowly.

Chute Deflector

Discharge

Chute

Inserthinge pin here

Hinge Pin

Figure 7

•Attach the longer of the three retainer straps on the discharge chute to the retainer clip on the deck. Refer to Figure 9.

•Insert the curved end of chute tube into the hole in the grass bag cover as shown in Figure 8.

190-190-100, 190-192-190 specifications

Cub Cadet has long been recognized as a leader in outdoor power equipment, and the model codes 190-192-190 and 190-190-100 are prime examples of their dedication to quality and innovation. These particular models stand out for their robust performance, user-friendly features, and advanced technology, making them ideal for both residential and commercial applications.

One of the standout features of the Cub Cadet 190-192-190 and the 190-190-100 is their powerful engines. Equipped with high-performance gas engines, they deliver exceptional torque and horsepower, allowing users to tackle even the toughest mowing conditions. This durability ensures that these mowers can handle varied terrains, whether it’s a flat suburban lawn or a more rugged landscape.

The cutting performance of these models is further enhanced by their innovative cutting deck design. Both the 190-192-190 and 190-190-100 feature precision-engineered cutting decks that allow for precise cutting heights and optimal grass dispersal. The decks are crafted from high-quality materials ensuring durability and longevity, while also delivering a clean and even cut every time.

Another remarkable feature is the ease of operation offered by the intuitive steering and control systems. Designed with the user in mind, these mowers are equipped with responsive steering mechanisms and ergonomic controls. This attention to ergonomics reduces operator fatigue during long mowing sessions, making the mowing experience more enjoyable and efficient.

Furthermore, both models incorporate advanced technology to enhance usability and maintenance. For instance, the models are integrated with user-friendly dashboards that provide real-time information about engine performance and maintenance needs. This feature allows users to keep tabs on their mower's condition, ensuring optimal performance and longevity.

In addition to their impressive performance and ease of use, safety features are paramount in the design of the Cub Cadet 190-192-190 and 190-190-100. Equipped with safety switches and durable frame construction, these mowers are built to provide peace of mind to users while they work.

In summary, the Cub Cadet 190-192-190 and the 190-190-100 represent the pinnacle of lawn care technology. With powerful engines, innovative cutting systems, user-friendly controls, and advanced safety features, these models set a high standard in outdoor power equipment. They are not just machines; they are tools designed to make lawn care a seamless and enjoyable task, catering to both enthusiasts and professionals alike.