Homelite UT08541, UT08540 manual Starting and Stopping, Operating the Blower

Page 12

OPERATION

STARTING AND STOPPING

See Figures 7 and 7a.

Starting the product differs depending on whether the engine is cold or warm. Refer to the label on the air filter base for choke positions A, B, and C. See Figure 7a.

TO START A COLD ENGINE:

1.Place the blower on a flat, bare surface.

2.Push the primer bulb, slowly, 5 times.

3.Move the choke lever to the full choke position marked A.

4.Squeeze the throttle trigger to full throttle position.

5.Pull the starter rope 3 times.

6.Move the choke lever to the half choke position marked B.

7.Squeeze the trigger to full throttle position and pull the starter rope until the engine runs.

8.Run the engine 30 to 45 seconds at full throttle in the half choke position, to warm up the engine.

9.Move the choke lever to position marked C.

TO START A WARM ENGINE:

THROTTLE TRIGGER

A

B

PRIMER BULB

CHOKE LEVER

Fig. 7

CHOKE DECAL

1.Push the primer bulb, slowly, 5 times.

2.Move the choke lever to the half choke position marked B.

3.Squeeze the trigger to full throttle position and pull the starter rope until the engine runs.

4.Move the choke lever to position marked C.

TO STOP:

See Figure 8.

Release the throttle trigger and push the STOP knob until the engine stops.

OPERATING THE BLOWER

See Figure 9.

■Start the blower, refer to “Starting and Stopping” earlier in this manual. Hold the blower with the upper handle in your right hand.

■To keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly into the center of a pile.

■Operate power equipment at reasonable hours only - not early in the morning or late at night when people might be disturbed. Comply with the times listed in local ordinances.

■To reduce sound levels, limit the number of pieces of equipment used at any one time.

WARNING:

Keep away from all hot surfaces of the blower. Failure to do so could result in possible serious personal injury.

C

Fig. 7a

PUSH TO STOP

Fig. 8

Fig. 9

Page 12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Operators Manual Table of Contents IntroductionGeneral Safety Rules Specific Safety Rules Symbols Symbol Name ExplanationService Features SpecificationsFeatures InstructionsPacking List Assembly Installing the Vacuum BAGAssembling the Blower Tubes Installing the Vacuum Tubes To install the vacuum tubesOperation Mixing the FuelFilling the Tank Starting and Stopping Operating the BlowerCruise Control Throttle Lock Vacuum OperationMaintenance Replacing and Cleaning the AIR FIL TERCleaning the Exhaust Port and MUF- Fler Spark ArrestorVacuum BAG Fuel CAPTroubleshooting Problem Possible Cause SolutionWarranty Limited Warranty StatementManufacturers Warranty Coverage Accessories Fuel Filter Ignition Assy IncludesService Repair Parts California Proposition

UT08540, UT08541 specifications

The Homelite UT08540 and UT08541 are part of a new generation of powerful and versatile outdoor power equipment designed for homeowners and professionals alike. These models are particularly well-suited for those looking to tackle yard maintenance tasks efficiently and with minimal effort. Built with innovative technologies, these trimmers offer ease of use, reliability, and performance that can handle a wide range of gardening chores.

One of the standout features of both the UT08540 and UT08541 is their lightweight design, making them easy to maneuver for extended periods without causing fatigue. Weighing in at just under 10 pounds, these trimmers are equipped with ergonomic handles and padded grips that provide comfort and stability during operation. The adjustable shaft length allows for optimal positioning, ensuring that users can reach even hard-to-access areas.

Powering these models is a robust 26cc 2-cycle engine, which is designed to deliver high torque and efficiency. This engine provides the necessary power to tackle thicker weeds and tougher vegetation without bogging down, making it ideal for both light trimming and heavy-duty tasks. Additionally, both models incorporate advanced technology that minimizes vibration and noise, enhancing the overall user experience.

The Homelite UT08540 and UT08541 also feature an easy start system, which allows users to get to work quickly without the hassle of traditional pull-start engines. This system includes a fuel primer bulb and an automatic choke that work together to ensure quick ignition and reliable performance in various weather conditions.

Another key characteristic is the use of a dual-line cutting head that accepts either .065-inch or .080-inch trimmer line. This flexibility gives users the choice of line thickness based on the density of the foliage being trimmed. The automatic feed spool eliminates the need for manual line adjustments, allowing for uninterrupted operation.

In addition to their capabilities as trimmers, these models can be fitted with optional attachments such as brush cutters, edgers, and blowers, enhancing their versatility. Their compatibility with various accessories makes them a valuable addition to any homeowner's or professional landscaper’s toolkit.

In summary, the Homelite UT08540 and UT08541 are powerful, lightweight, and versatile outdoor trimmers equipped with user-friendly features and advanced technology. Whether maintaining your lawn, trimming those hard-to-reach areas, or tackling tougher landscaping tasks, these models are designed to meet the demands of any user, making yard maintenance more manageable and efficient than ever.
Top Page Image Contents