VACUUM KIT 2010
Assembling the kit
1.Remove the additional plug.
2.Insert the adapter into the mowerdeck.
3.Insert the hose into the adapter.
4.Insert the vacuum spout into the hose.
5.Apply the tie strap to the lower part of mowerdeck.
BATTERIES MAINTENANCE
1.Store battery in dry and ventilated area disconnecting the bat- tery from the wiring harness.
Storage temperature should not exceed 23¡ C.
2.Avoid storing discharged batteries. It is extremely important that batteries are fully charged before storing.
3.If battery has discharged, it should be put immediately on recharge. Required recharging time: 24 h.
4.Use only the charger supplied with the battery or one with fol- lowing features: maximum current output
5.Before prolonged lawnmower storage, disconnect battery from engine wiring harness and make sure battery is fully charged.
6.Avoid shorting battery terminals. The high current delivered by batteries can overheat and damage the insulation and internal connections.
Leave the unit on a level surface and shift the throttle lever to the position.
Page 5