DigiPower ACD-100 warranty Precaution

Page 2

If you have a portable device other than a Digital Camera and would like to use the ACD-100to power it up, then use the following guidelines:

1.Your device must be rated between 3V and 10V DC and no more than 2.5 Amp (2500mAh) of current.

2.Use the chart below (FIGURE 2) to determine the output current from the ACD-100.

3.The ACD-100’s output current must be equal to or greater than the current your portable device requires. Remember: 1.5Amp = 1500mAh, 2Amp = 2000mAh.

4.If the exact Voltage for your device is not listed on the chart below, and is under 10V, then try setting the Voltage Dial to the nearest Voltage, using the lower Voltage first.

5.If the device does not power up, be sure to disconnect the Pin Connector from the device, reset the Voltage Dial to the next higher setting and then reconnect your device.

6.DANGER: Do not continue trying higher Voltage settings as this may result in damage to your device and / or the ACD-100.

7.Mizco International, Inc. is not responsible for end user setting the Voltage above a camera’s or device’s requirement level. Mizco’s warranty does not extend to misuse of the ACD-100.

ACD-100 Voltage Dial

4V

 

 

 

 

 

 

 

.

 

V9

 

V

 

7V

8

3

 

 

 

 

 

 

 

 

 

 

 

 

4V

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

.

 

 

 

 

3

 

5V

 

 

 

 

 

 

 

.

6

 

 

4

 

 

 

 

5

 

 

 

 

V

 

 

 

.

5V

 

 

 

 

 

 

 

V

 

 

Figure 1

ACD-100 Electrical Specifications

Voltage

Amperage

3.0 Volts

1.5 Amp

3.4 Volts

2.5 Amp

4.5 Volts

1.5 Amp

5.0 Volts

2.0 Amp

6.0 Volts

2.0 Amp

6.5 Volts

2.5 Amp

7.0 Volts

2.0 Amp

8.4 Volts

1.3 Amp

9.0 Volts

1.6 Amp

 

FIGURE 2

PRECAUTION:

1.Do not expose this product to water, rain or moisture.

2.Make sure the ACD-100is not plugged in when setting the Voltage a nd/or changing the Pin Connector.

3.If traveling abroad, do not attach any voltage converters to this adaptor.

4.Make sure you know your camera’s or device’s Voltage requirement. Do not set the Voltage to a higher setting than is required by your camera or device as this may result in damage to your camera, the device or the ACD-100.

5.Mizco International, Inc. is not responsible for end user setting the Voltage above a camera’s or device’s requirement level. Mizco’s warranty does not extend to misuse of the ACD-100.

Image 2
Contents Package Includes InstructionsPrecaution ONE Year Warranty Warranty Registration
Related manuals
Manual 2 pages 16.2 Kb

ACD-100 specifications

The DigiPower ACD-100 is a cutting-edge portable power bank designed to meet the needs of today's tech-savvy users. This innovative device is ideal for charging various electronic gadgets such as smartphones, tablets, cameras, and more, making it a must-have accessory for travelers, outdoor enthusiasts, and anyone in need of reliable power on the go.

One of the standout features of the DigiPower ACD-100 is its impressive capacity. With a high-capacity lithium-ion battery, the device provides ample energy to charge multiple devices multiple times, allowing you to stay connected without the worry of running out of power. The sleek and lightweight design ensures that it can easily fit into your bag or pocket, making it highly portable.

The ACD-100 incorporates advanced charging technologies, including Quick Charge 3.0. This technology allows for faster charging speeds when used with compatible devices, significantly reducing the amount of time required to recharge your gadgets. Additionally, the power bank supports multiple output options, including USB-A and USB-C ports, enabling users to charge various devices simultaneously.

Another notable characteristic of the DigiPower ACD-100 is its built-in safety features. Equipped with overcharge, over-discharge, and short-circuit protection, it ensures the safety of both the power bank and the connected devices. This added layer of safety provides peace of mind when using the device in different settings, whether at home, in the office, or outdoors.

The LED indicator on the ACD-100 serves a dual purpose: it provides real-time information on the battery level, allowing users to keep track of remaining power, and it also indicates when the device is actively charging. This user-friendly feature eliminates any guesswork, making it easy to manage your charging needs.

In summary, the DigiPower ACD-100 offers a perfect blend of high capacity, fast charging capabilities, multiple ports, and robust safety features. Its portability and user-friendly design make it an essential power solution for anyone looking to stay connected in today’s fast-paced world. Whether you are traveling, camping, or simply out and about, the ACD-100 is well-equipped to handle all your charging needs efficiently and effectively.