Troubleshooting

TROUBLESHOOTING		Before Requesting Service Review These Suggestions
Problem	Possible Cause		Solution
Engine will not start.	- Battery is low or dead.		- Charge battery or replace if the battery does not hold charge.
Engine will not start.	- Battery is low or dead.
(starter does not turn)	- Battery cable is disconnected or battery terminal is corroded.		- Clean battery terminal and cable then reconnect.
	- Hose coupler is not installed, allowing interlock switch to operate.		- Install hose coupler securely to the unit and check whether
			interlock switch is engaged by lever.
	- Harness wire is bad or disconnected from interlock switch.		- Check harness wire connection and replace if necessary.
Engine will not start.	- Throttle stop switch in idle position.		- Check throttle.
(starter turns)	- Out of gasoline. Bad or old gasoline.		- Check gasoline, Replace if gasoline is old.
	- Spark Plug wire disconnected.		- Connect spark plug wire.
	- Dirty air cleaner.		- Clean or replace air cleaner. Or contact a qualified service person.

Will not vacuum or has poor	Nozzle height too high or too low. Clogged hose or exhaust.		Adjust nozzle position. Unclog hose or exhaust (see page 6).
vacuum performance.	Excessive quantity of debris.		Allow air to feed with debris.

Abnormal vibration.	Loose or out of balance impeller or loose engine.		Check impeller and replace if required. Check Engine.

Engine is locked, will not	Debris locked inside impeller. Engine problem.		See page 6, Clearing a clogged impeller housing. Contact an engine
turn over.			servicing dealer for engine problems.

Engine Service and Warranty

Contact your nearest engine manufacturer's authorized

servicing dealer.

	Serial Plate	Record your machine model, serial number
	Serial Plate	and date-of-purchase and where purchased
		and date-of-purchase and where purchased

	1803 S. Jefferson
	P.O. Box 308
	Lee's Summit,
R	MO	64063 / USA
	Tel (816) 524-9666

	Fax (816) 524-6983

Model

Serial No.

113 dB

Unit(Weight)

Engine Power

lbs.

rpm

min-1

Purchase Purchased

Datefrom

WARRANTY PROCEDURE

Please fill in the WARRANTY CARD and send the upper part to Billy Goat. The WARRANTY terms are stated on the lower part which remains with the user. Whenever a Billy Goat Machine is faulty due to a defect in material and / or workmanship, the owner should make a warranty claim as follows:

The Machine should be taken to the dealer from whom it was purchased or to an authorized Billy Goat dealer.

The owner should present the remaining half of the Warranty Registration Card, or, if this is not available, the invoice or receipt.

The Warranty Claim will be filled in by the authorized Billy Goat Dealer, who will send it with the faulty part to Billy Goat headquarters.

The Quality / Service department at Billy Goat headquarters will study the claim and parts and will notify their conclusions.

The decision by the Quality / Service department at Billy Goat headquarters to approve or reject a Warranty claim is final and binding.

Note: To process a Warranty Claim, it is necessary to quote the Model & Serial number who are printed on the Billy Goat Serial Plate.

BILLY GOAT INDUSTRIES INC.

1803 S.W. JEFFERSON STREET / LEE'S SUMMIT, MO 64082-2312 / USA

PHONE: 816-524-9666 FAX: 816-524-6983

www.billygoat.com

Part No. 790294

Page 12 of 12

Form No. F111805B

QL2300KO specifications

The Billy Goat QL2300KO is a powerful and versatile outdoor equipment designed for quick and efficient lawn care, particularly for those who manage large properties or commercial landscapes. This machine embodies the commitment to quality and durability that Billy Goat is known for, making it a preferred choice among professional landscapers and enthusiastic homeowners alike.

One of the standout features of the QL2300KO is its robust 230cc engine, which delivers ample power for tackling tough lawns and clearing debris. This engine is designed to be fuel-efficient while providing top-notch performance. The unit's recoil start mechanism makes it easy to fire up, ensuring that you can get to work with minimal downtime.

The QL2300KO’s cutting system is designed for precision. It features a 30-inch wide cutting deck that allows for efficient mowing, reducing the number of passes required. The deck is constructed from heavy-duty materials, designed to withstand the rigors of regular use while providing clean, even cuts. The cutting height is adjustable, allowing users to customize their mowing height to suit different grass types and preferences.

In terms of technology, the QL2300KO is equipped with advanced features that enhance its usability. Its swivel front wheel design provides excellent maneuverability, allowing for smooth navigation around landscaping obstacles. The ergonomic handlebar not only improves control but also ensures comfort during extended use, reducing operator fatigue.

Durability and ease of maintenance are also key highlights of the QL2300KO. The construction includes heavy-duty components that are built to last, alongside accessible maintenance points that simplify routine checks and servicing. This commitment to longevity ensures that the investment in a QL2300KO pays off over time with reliable performance.

Safety is a crucial aspect of the QL2300KO’s design, featuring a safety blade brake that stops the blades quickly when the operator releases the handle. This mechanism prevents accidents and ensures a safer mowing experience.

Overall, the Billy Goat QL2300KO is an exceptional outdoor tool that combines power, efficiency, and ease of use. Its blend of advanced features and rugged build makes it an ideal choice for professionals and homeowners looking to maintain their lawns and landscapes effectively. Whether dealing with overgrown grass or tackling debris, the QL2300KO is equipped to handle a variety of challenges, proving itself as a reliable partner in outdoor maintenance.

Problem

Possible Cause

Solution

Serial Plate

113 dB

Purchase Purchased

Datefrom

WARRANTY PROCEDURE

QL2300KO specifications