Features, Assembly, Use | Black & Decker TLD100 guide

ENGLISH

(Original instructions)

uWhen disposing of batteries, follow the instructions given in the section “Protecting the environment”.

uDo not incinerate the batteries.

uDo not expose the batteries to water.

Warning Symbols

The following symbols are found on the tool:

;Warning! To reduce the risk of injury, the user must read the instruction amnual.

Features

This tool includes some or all of the following features.

1.LED spot projector

2.Infrared sensor

3.Battery Compartment

4.LCD screen

5.ON/OFF button

6.Threshold setting

Fig. A

LCD Display.

7. Reference temperature

Shows the temperature of the area where the instrument was initially pointed when you turned on the power. To reset the reference, turn the power off, aim at a new reference spot, and turn the power back on.

8. Scan temperature

Shows the average temperature across the area you're aiming at.

Note: The Thermal Leak Detector compares these two temperatures. When the difference exceeds the threshold you've set, the projected LED spot will change to red or blue.

Assembly

Warning! Use 9V size (6LR61) alkaline batteries only.

Installing the battery (fig. B)

uOpen the battery compartment cover (3) by pressing the tabs of the cover in towards the center and pulling the cover out.

uInsert one 9V (6LR61) alkaline battery.

Note: Always insert batteries correctly with regard to polarity (+ and –), marked on the battery and the equipment.

Note: Remove dead batteries immediately.

Changing the temperature display (fig. B)

uOpen the battery compartment cover (3) by pressing the tabs of the cover in towards the center and pulling the cover out.

uSlide the temperature selection switch to the desired position.

Note: Will set your thermal leak detector to the Fahrenheit scale.

Note: Will set your thermal leak detector to the Centigrade scale.

Use

Switching On and Off

uPress the ON/OFF button to turn the unit on.

uPress the ON/OFF button to turn the unit off.

Note: The unit will automatically turn off after 10 minutes.

Setting the threshold for colour change (fig. C)

uFor detecting small temperature changes of 1º F (0.5º C), move the slider to the 1º mark (9) on the back of the detector.

uFor detecting medium temperature changes of 5º F (3º C), move the slider to the 5º mark (10) on the back of the detector.

uFor detecting large temperature changes of more than 10º F (5.5º C), move the slider to the 10º (11) mark on the back of the detector.

uIf you do not want the LED spot to change color, move the slider to the top position (12) where the color spots are X-ed out.

Note: You can change the threshold setting while you are scanning. If the color is changing erratically, try increasing the threshold. If you see a temperature difference on the screen, but the light is not changing color, try reducing the threshold.

Using the thermal leak detector (fig. D)

uHold the unit as shown. Aim near the location you want to scan for a draft or thermal leak. This initial aim point will be your reference target.

uTurn on the power.

uKeep the unit aimed at the reference target until the green light shines on the target and a Reference Temperature appears on the screen.

uSlowly scan the Thermal Leak Detector across the area of interest. If the scanned temperature is hotter than the reference temperature by more than the threshold, the light will turn from green to red. If the scanned temperature is colder than the reference temperature by more than the threshold, the light will turn from green to blue.

TLD100 specifications

The Black & Decker TLD100 is a versatile and reliable tool designed for various tasks around the home and job site. This laser level is specifically engineered to ensure precision and ease-of-use, making it an ideal choice for both DIY enthusiasts and professional contractors.

One of the standout features of the TLD100 is its self-leveling mechanism. This technology allows the tool to automatically adjust to uneven surfaces, providing accurate horizontal and vertical lines without the need for manual adjustments. Whether you are hanging shelves, installing tiles, or aligning cabinets, the self-leveling feature saves time and increases accuracy.

The TLD100 also boasts a range of laser visibility options. Its bright, clear laser beam can be seen up to 100 feet away, making it suitable for both indoor and outdoor projects. This visibility ensures that users can easily see the laser line, even in well-lit environments. Furthermore, the adjustable laser head allows for greater versatility in directing the laser line exactly where it is needed.

Durability is another significant characteristic of the Black & Decker TLD100. Constructed with a robust housing, this laser level is built to withstand the rigors of any job site. Its compact size and lightweight design make it easy to transport and operate, allowing users to carry it effortlessly from one project to another.

Another notable feature of the TLD100 is its magnetic base. This innovative design allows the laser level to attach securely to metal surfaces, providing hands-free operation while users complete their tasks. Additionally, it includes a tripod mount, enabling users to set up the tool at various heights and angles for added convenience.

In terms of power, the TLD100 is powered by a standard 9V battery, ensuring long-lasting performance. The battery compartment is easily accessible, allowing for quick and hassle-free replacement when needed.

Overall, the Black & Decker TLD100 is an excellent choice for those seeking a reliable, accurate, and easy-to-use laser level. With its self-leveling feature, impressive range, durable construction, and practical design, it is poised to meet the demands of various applications. Whether you are a seasoned professional or a casual DIYer, the TLD100 is a tool that promises to enhance your accuracy and efficiency on any project.