OPERATING INSTRUCTIONS
GETTING TO KNOW YOUR PRESSURE WASHER
CAUTION
When you wish to stop using the pressure washer temporarily, make sure that the safety lock has been engaged to avoid any accidental operation. (Fig. 5)
Safety
Using the Rotary Brush
The rotary brush is used with the trigger gun. Push the brush onto the trigger gun nozzle and turn clockwise to lock as you would for the lance. (Fig. 6) The brush may be used for washing cars, boats, windows and other similar items. The rotary brush operates at open orifice pressure so that it will not direct a stream of water. (Fig. 8)
Fig. 5
Lock
Using the Adjustable Fan Jet lance
The angle of the water on the fan jet lance may be adjusted between 0° and 60° by turning the nozzle adjuster
Fig. 7
Fig. 8
Using Detergent with the Pressure Washer
The soap dispenser may only be used with the trigger gun.
Add detergent to the bottle and then attach the detergent applicator bottle to the high pressure lance, just push it firmly onto the end of the trigger gun and turn clockwise to lock in place. (Fig. 9) To remove the detergent applicator bottle, lift the tab on the top of the connector and pull off.
Fig. 9
WARNING
Do not use acids, solvents, or any other flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.
Rear View | 3 |
15
1. | Water Output | 8. | Trigger Gun | |
9. | Safety Trigger Lock | |||
2. | Water Inlet | |||
10. | High Pressure | |||
3. | Accessory Storage | |||
| Hose Connector | |||
4. | Handle |
| ||
11. | Trigger | |||
5. | On/Off Switch | |||
12. | Adjustable Lance | |||
6. | Rotary Brush | |||
13. | Garden Hose Coupling | |||
7. | High Pressure Hose | |||
14. | Soap Dispenser | |||
|
| 15. | Power Cord Storage |
Illustrations may differ somewhat from actual product.
Technical Specifications
Voltage: | 120V., 60Hz. |
Power: | 12 Amps |
Pressure: | 1600 psi. (max) |
Flow Rate: | 1.65 gpm |
7
4