I.C.T.C. Holdings Corporation Pressure Washer Important Operation / Maintenance Precautions

Page 4

IMPORTANT OPERATION / MAINTENANCE PRECAUTIONS

!Change oil in pump after the first 50 hours, then every 500 hours.

Use SAE30 Non-Detergent Motor oil.

!Change engine oil as specified by the Honda. See Honda owners manual.

"Do Not run washer longer than 3 minutes with gun closed, as this can result in damage to the seals. Heat generated by the re-circulating water can damage seals.

"Avoid freezing pump. Drain unit prior to storage, or run an antifreeze solution through pump. Ensure the pump and hoses are completely bleed of all liquid.

START-UP AND OPERATION INTRODUCTION

1.Verify that the vented YELLOW dip stick is installed in pressure washer pump. Remove the RED shipping plug ( if present ) from top of the pump and replace it with the YELLOW oil level dipstick provided. Fig. 1

2.Before first use, check engine and pump oil levels.

Note: For shipping purposes, engine oil has not been added.

Before each use, check engine oil level by unscrewing the oil dipstick. Add motor oil (consult Honda manual for correct grade) as required to bring to proper level, approximately mid-way on dipstick.

3.Check water supply volume. To operate correctly, the unit requires a water supply 25% greater than the units output. ( i.e. PW2700SC = 3 GPM, PW2000SC = 3.75 GPM of water flow).

To test water supply output;

a)Turn water flow to full maximum output.

b)Place a 5 gallon pail or container under water flow for exactly 1 minute ( 60 seconds).

c)Measure contents to determine water flow.

4.Connect a standard garden hose to the water inlet or bottom connection on the pump head ( Female hose connector ). Fig. 2.

Yellow

Red

Fig. 1

Fig. 2

Pressure

Control

5.Connect the high pressure hose to the water “Outlet” or upper connection on the pump head.

( Male quick connect nipple). Fig. 2.

6.Turn the unloader knob on top of the pump head counter- clockwise to reduce the pressure prior to starting the machine.

7.Select the desired tip for the job. Insert tip into wand

Outlet

Injector

Inlet

H.E.R.O. Industries

Page 4

Pressure Washer Owners Manual

Page 3 Page 5
Image 4
Page 3 Page 5
Contents R.O. Industries Table of Contents Important Safety Precautions Important Operation / Maintenance Precautions START-UP and Operation IntroductionShutting Down the Machine After USE Nozzle Selection Trouble Shooting Fault Cause RemedyR.O. Industries REF # Description QTY Pump Only, HPWD2000LC, TT9071HPWD2000LC & HPWD2700 Only Unloader and Injector Controls PW-1130 HPWD2000 Only Model WP10 Unloader With InjectorREF # Description QTY BUILT-IN Unloader and Injector Controls HPWD2700 PW-RKI094 Pump Service Valve AssembliesRepair Kits Part Description Kit # Ref# Included # Pieces NumberChassis PARTS, GUN, Hose & Accessories Description QTYAccessories Service Records Model # Serial # Purchased on Purchased from

PW2000-SC, Pressure Washer, PW2700-SC specifications

I.C.T.C. Holdings Corporation is recognized for its innovative approach to pressure washing technology, particularly with its advanced models, the PW2000-SC and PW2700-SC. These powerful pressure washers are designed to cater to a variety of cleaning needs, providing users with effective and efficient solutions for both domestic and commercial applications.

The PW2000-SC model stands as a testament to user-friendly design and high performance. It boasts a maximum pressure of 2000 PSI, ensuring that dirt, grime, and stubborn stains are easily removed from surfaces. This model features an adjustable pressure nozzle, allowing users to tailor the intensity of the spray according to the task at hand, whether washing a car or tackling a more robust outdoor cleaning project. Additionally, the PW2000-SC is equipped with a 1.8 GPM (gallons per minute) water flow rate that facilitates thorough cleaning while being water-efficient.

In contrast, the PW2700-SC takes cleaning capabilities to the next level, offering an impressive maximum pressure of 2700 PSI. This power makes it particularly suited for heavy-duty applications like cleaning driveways, patios, and machinery. Like its counterpart, it features multiple nozzle options, including a turbo nozzle capable of rotating its spray pattern for powerful 360-degree cleaning. The water flow rate of 2.5 GPM ensures that even the toughest stains are removed quickly and effectively.

Both models incorporate cutting-edge technology to enhance user experience and performance. They utilize an electric motor that not only reduces noise levels but also ensures a consistent power output for reliable operation. The built-in thermal relief system prevents overheating, extending the life of the pressure washer and reducing maintenance needs.

Portability is another strong feature of I.C.T.C. Holdings’ pressure washers. Both models come with sturdy wheels and ergonomic handles, allowing users to easily transport them across various terrains. Additionally, the compact design means they can be stored conveniently when not in use.

Safety features are paramount, with both models equipped with a safety lock and trigger mechanism to prevent accidental activation. This ensures a secure user experience, making them ideal choices for homeowners and professionals alike. Overall, the PW2000-SC and PW2700-SC from I.C.T.C. Holdings Corporation exemplify reliability, efficiency, and advanced engineering in the realm of pressure washing technology.
Top Page Image Contents