Graco Inc 308-522, 800-345, 4040 manual Ground Fault Circuit Interrupter Protection, Extension Cords

Page 3

This product must be grounded. If it should malfunction

or breakdown,groundingprovidesa path of least resistance for electriccunent to reducetherisk of electric shock. This equipmentis equippedwith a cord having an equipment-groundingconductoranda groundingplug. The plug must be plugged Into an

appropriateoutlet that is properly installed and grounded in accordancewith all local codes and ordinances.

DANGER

Improperconnection of theequipment- groundingconductorcanresult in theriskof electrocution.Check with aqualifiedelectrician orserviceperson if youare in doubtas to whether the outletis properly grounded. Do not modify the plug provided with the product-if it will not fit theoutlet,haveaproperoutlet installed by a qualified electrician.

GROUND FAULT CIRCUIT INTERRUPTER PROTECTION

To comply with the National Electrical Code(NFPA 70) and to provide additionalprotectionfromtherisk of

electricpressurewasherconnectthisshock,

to a

receptacle that is protected by grounda-fault circuit-intempter (GFCI).

.. ,

EXTENSION CORDS

Use only4-wireextensioncordsthathave4-prong

or pull on any cord to disconnect. Keep cord awayfrom

grounding-type plugs and 4-polecord connectorsthat

' heat and sharp edges. Always disconnect the extension

accept the plug from the product. Use only extension

cord fromthereceptaclebeforedisconnectingthe

cords that are intendedforoutdoor

use. These

Droduct from the extension cord.

 

extensioncords

are identified

by marking,

- 1

WARNING 1-

 

"Acceptable foruse

withoutdoorappliances;store

 

indook while not in use." Use only.extension cords

To reducetheriskofelectrocution,

keep all

having an electricalrating notless than the ratingof the

connectionsdry

and off the ground.Donot

productDonotusedamagedextensioncords.

.

touch plug with wethands.

 

Examineextensioncordbeforeusing

and replace if

 

 

 

damaged. Donotabuse extensioncord anddo notyank

EQUIPMENT MISUSEHAZARD

General Safety

Any misuse of thepressurewasheroraccessories,

suchasoverpressurizing, modifying parts,using incompatible chemicals and fluids, or using wornor damaged parts, can causethem to rupture andresult in fluid injection, splashing in the eyesor on the skin, or other serious bodily injury, fire, -explosionor property damage.

NNER alter or modify any part ofthis equipment; doing so could cause itto malfunction.

CHECK all sprayequipmentregularly and repair or replace worn or damaged park immediately.

System Pressure

This sprayer can develophigh operating pressure. Be sure thatall spray equipment and accessories ratedare to withstandthe maximum workingpressure of this sprayer. DO NOT exceedthemaximumworking pressure of any component or accessory used in the system.

Chemical Compatibility

BE SURE that all chemicalsused in thechemical injector are compatiblewiththewettedparts ofthe hose, gun, wand andtip, as given in the Technical Data (inside back cover). Always read the chemical manufacturer's literature before using any chemicalin

ALWAYS wear protective eyewear and appropriate clothing. If using a chemical injector, read and follow

chemicalthemanufacturer'sliteraturefor recommendationson additional protective equipment, such as a respirator.

this pressure washer.

"

308-522 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents INSTRUCTIONS-PARTS List If any fluid appears to penetrateyourskin,get Pressure Relief ProcedureFluid Injectionhazard Nner try to stop or deflect leaks with your hand or bodyGround Fault Circuit Interrupter Protection Extension CordsEquipment Misusehazard Terms Hose SafetyConnect to Water Supply InstallationSet Up Check for Shipping DamageStartup Trigger Safety LatchInstallingand Changing Spraylips Operationor Non-detergent oil Months MaintenanceSHUTDOWN, Flushing Storage Operation Each 500 hoursTroubleshooting Chart 800-345Hvdra-Clean@4040Pressure Washer For wiring diagram, see page14Parts Drawing 800-345Hydra-Clean@4040Pressure Washer Parts ListModel Housing Pump and Motor AssemblyPump Assembly,4000 psi Pump Assembly, 4000 psi Pumping Section Pump ServiceServicing the Plungers ValvesServicingtheV-Packings ANTI-FREEZE Flush KIT AccessoriesDOWNSTREAMCHEMICALINJECTORKITWATERSANDBLASTINGKIT800-120 Upstream Chemical InjectorkitGracowarranty Important Phone NumbersGraco INC. PO.BOX 1441 MINNEAPOLIS,MN

4040, 800-345, 308-522 specifications

Graco Inc. is a leading manufacturer known for its innovative fluid handling systems and equipment. Among its extensive product lineup, the model 4040,800-345,308-522 stands out due to its robust design and advanced technological features. Designed primarily for industrial applications, this model caters to various sectors, including manufacturing, construction, and automotive industries.

One of the main features of the 4040,800-345,308-522 is its high-pressure capabilities. This model can handle a significant volume of fluid while maintaining an impressive control over pressure, ensuring efficient operation even in demanding environments. The durable construction material used in the pump's design contributes to its longevity and resilience against wear and tear.

Another notable characteristic of the Graco 4040 model is its precision fluid handling technology. The use of advanced engineering techniques allows for smooth operation and reduced downtime, which is vital for industries that rely on consistent performance. The pump is equipped with an intuitive control system, enabling users to easily manage and monitor operations in real-time.

The Graco 4040,800-345,308-522 additionally boasts an energy-efficient design. By optimizing fluid dynamics within the system, the model not only reduces operational costs but also minimizes its environmental impact. This focus on sustainability reflects Graco Inc.’s commitment to producing environmentally friendly products.

Moreover, the model features a user-friendly interface that simplifies setup and operation, making it accessible for technicians and workers alike. The inclusion of safety mechanisms enhances its usability, ensuring that even in high-pressure situations, the risk of accidents is minimized.

In terms of maintenance, the design facilitates easy access to components, allowing for quick servicing and minimal disruptions to workflow. This practicality can result in substantial time and cost savings over the equipment's lifespan.

Overall, the Graco Inc. 4040,800-345,308-522 exemplifies cutting-edge technology combined with practical features, making it a reliable choice for industries that demand high performance and efficiency. With its strong focus on durability, user-friendliness, and environmental responsibility, this model represents the high standards that Graco Inc. has set in the fluid handling equipment sector.
Top Page Image Contents