Graco Inc 802-776, 800-232 manual Equipmentmisuse Hazard

Page 3

EQUIPMENTMISUSE

HAZARD

General Safety

Any misuseof the pressure washer or accessories, such as overpressurizing, modifying pans, using incompatible chemicals and fluids, or using worn or damagedpans, can cause them to rupture and result influid injection, splashing inthe eyes oron theskin, or other serious bodily injury or propeny damage.

NEVER alter or modify any pan of this equipment, doing so could cause it to malfunction.

CHECK allcleaningequipment regularlyandrepairor replace worn or damaged pans immediately.

If using a chemical injector,. read and follow the chemical manufacturer's literatureregardingthe use of protective eyewear, clothing andequipment.

System Pressure

This sprayer can develop 1100 psi (76 bar) MAXIMUM WORKING PRESSURE. Be sure that all spray equipment and accessories are rated to withstand the maximum workingpressure of this sprayer. DO NOT exceed the maximum working pressure of anycomponent or accessoryused inthe system.

Chemical Compatibility

BE SURE that all chemicals used in thechemical injector are compatible with the wetted partsof the

hose, gun. wand andtip, as given in the Technical Data on the back cover. Always read the chemical manufacturer's literature before using any chemical in this pressure washer.

HOSESAFETY

High pressure fluid in the hoses can be very dangerous. If the hose develops a leak, split or rupture due to any kind of wear, damage or misuse. the highpressure spray emitted from itcan cause a fluid injection injury or other serious bodily injury or propeny damage.

TIGHTEN all fluidconnections securely before each

use.Highpressurefluidcandislodgealoosecoupling

or allow high pressure spray to be emitted from the coupling.

c

.~

NEVER usea damaged hose. Beforeeach use, check entire hosefor cuts, leaks, abrasion, bulgingcover, or damage or movement of the hosecouplings. If any of these conditions exist, replacethe hoseimmediately. DO NOTtry to recouple high pressurehoseor mend it with tape orany other device.Arepaired hosecannot contain the highpressure fluid.

HANDLE AND ROUTE HOSES CAREFULLY.-Donot pull on hoses to move the pressure washer. Do not use chemicals which are not compatible with the inner tube and cover of the hose. DO NOT expose Graco hose to temperatures above 20OoF (94'C)or below -4OOF (-4OOC).

ELECTRlCAL HAZARD

NEVER operatethe pressurewasher without the unit being properly grounded. This includes internal wiring on unit, plug (ground plug must be intact),and building wiring. Because water is a natural conductor, it is very Fmportant to provide a good ground circuit to avoid serious bodily injury if equipment should fail.

MOVING PARTS HAZARD

Moving panscan pinch or amputate your fingers or other body parts. KEEP CLEARof movingpans when starting or operating thepressurewasher. Followthe Pressure Relief Procedure, page 2. before checking or servicing the pressure washer to prevent discharging high pressure fluid from thegun.

IMPORTANT

United States Government safety standards have been adopted under the Occupational Safety and Health Act. These standards-particularly the General Standards, Pan 1910, andthe Construction Standards, Part1926-should be consulted.

WARNING: Alerts user to avoid or correct conditions that could cause bodily injury.

CAUTION: Alerts user to avoid or correct conditions that could causedamageto or destruction of equipment.

NOTE: Identifies helpful procedures and information.

802-776 3

, .. ....._. _I ..,:'

,. ....., .....

I

. .

Page 2 Page 4
Image 3
Page 2 Page 4
Contents INSTRUCTIONS-PARTS List e Fluid Injection Hazard Equipmentmisuse Hazard Mzn6 Assemblyanstallation SET-UPSTART-UP 802-776 SHUTDOWN. FLUSHING, and Storage Disengagethe triggersafetylatchandtriggerTroubleshooting Chart Servicing The V-Packings Pump ServicePage Parts Drawing \ o Wiring Diagram Parts ListNO. no HOW to Order Replacement PartsValve KIT Valve Plug KIT Parts DrawingRepair Kits OIL Seal KITChemical Injector Technical DataGraco Warranty

800-232, 802-776 specifications

Graco Inc. is a well-known manufacturer in the fluid handling industry, providing a diverse range of products designed to facilitate the efficient and safe transfer of fluids. Among its notable offerings are the Graco Inc. models 802-776 and 800-232, which cater to different applications requiring precision and reliability in fluid handling.

The Graco 802-776 is particularly recognized for its robust design and outstanding performance in high-pressure environments. This model is typically utilized in applications such as air-powered spray guns and paint distribution systems, making it ideal for professionals in the automotive, manufacturing, and construction industries. One of the main features of the 802-776 is its high flow rate, allowing users to complete tasks more efficiently. Additionally, the unit is equipped with a heavy-duty construction that minimizes wear and tear, thus extending its operational lifespan.

On the other hand, the Graco 800-232 is engineered for versatility, providing solutions for a variety of fluid types, including paints, coatings, and adhesives. This unit is highly adaptable, making it suitable for both industrial and commercial uses. A standout feature of the 800-232 is its compact design, which facilitates easy transport and maneuverability in tight spaces. Users appreciate its user-friendly interface, which simplifies operation, reducing the learning curve for new staff or operators.

Both models are equipped with advanced technologies that enhance functionality and safety. For instance, they include pressure control features that provide stability in fluid delivery, ensuring that users can achieve consistent results regardless of application conditions. Furthermore, Graco products are designed with durable materials, ensuring longevity and reliability over time, which is essential in demanding work environments.

Safety is also a critical aspect of the design for both models. They incorporate various safety features to minimize risks during operation, including automatic shut-off mechanisms and pressure relief valves. These technologies not only protect the equipment but also ensure the safety of the personnel operating them.

In summary, Graco Inc. models 802-776 and 800-232 are exemplary products that showcase the company's commitment to delivering high-quality fluid handling solutions. With their unique features, advanced technologies, and user-centric designs, these units are well-suited for a broad range of applications, addressing the demands of modern industries effectively.
Top Page Image Contents