Graco Inc 802-777, 800-233 manual Hazard, Terms

	~	~	~			~	~
	HAZARD		NEVER use a damaged hose. Before each use, check
, .	eapleoai Safeuy		entire hose for cuts,leaks, abrasion, bulging cover, or
			damage or movement of the hose couplingsIf.any of
	Any misuseof the pressure washer oraccessories,		these	conditions exist,	replace thehose immediately.
	such as overpressurizing, modifying parts, using		DO NOT try to recouple		high	pressurehose or mend it
	incompatible chemicals and fluids, or using worn		with tape or any other device. A			repaired hosecannot
	damaged parts, can cause them to rupture and result contain the high pressure fluid.
	in fluid injection, splashing the eyesor ontheskin,		HANDLE AND ROUTE HOSES CAREFULLY. Do not
	or other serious bodily injuryor property damage.
			pull on hoses to move the pressure washerDo. not
	NEVER alter or modify any part of this equipment,		use chemicals which are not com.patible with				the
	doing so could cause it to	malfunction.	inner	tube andcover of the hose. DO NOT expose

Graco hoseto temperatures above 200OF (94OC) or

CHECK all cleaning equipment regularlyand repairor below -4OOF(-4OoCJ. replace worn or damaged parts immediately.

If using a chemical injector, read and follow the chemical manufacturer's literatureregarding theuse of protective eyewear, clothing and equipment.

$yStWDl Pl'eSSM6e

This sprayer can develop 1800 psi (123 bar)

MAXIMUM WORKING PRESSURE. Be sure that all

spray equipment and accessories are rated to withstand the maximum working pressureof this sprayer. DO NOT exceed the maximum working pressure of any component or accessory used in the system.

Chemical Compatibility

BE SURE that all chemicals used in thechemical injector are compatible with thewetted partsof the hose, gun, wand andtip, as given in the Technical Data on the back cover. Always read the chemical manufacturer's literature before usingany chemical in this pressure washer.

~~~~~~~~A~ ~ ~ ~ A

NEVER operate the pressure washerwithouttheunit being properly grounded. This includes internal wiring on unit, plug (ground plugmust be intact),and building wiring. Because water is a natural conductor, it is very important to provide a good ground circuit to avoid serious bodily injury if equipment should fail.

Moving partscan pinch or amputate your fingers or other body partsKEEP. CLEAR of moving partswhen starting or operating the pressure washer. Followthe Pressure Relief Procedure,page 2,before checking

or servicing the pressure washer to prevent discharging high pressure fluid fromthe gun.

High pressure fluid in the hoses can be very dangerous. If the hose develops a leak,.split or rupture dueto anykind of wear, damage or misuse, the high pressure spray emitted fromit cancause a fluid injection injury or other serious bodily orinjury property damage.

TIGHTEN all fluid connections securely beforeeach

use.Highpressurefluidcandislodgealoosecoupling

or allow high pressurespray to be emitted from the coupling.

IMPORPAMB

United States Government safety standards have been adopted under the, Occupational Safety and Health Act. These standards-particularly the General Standards, Part 1910, and the Construction Standards, Part 1926-should be consulted.

TERMS

W V A i ~ b J u k G : Alerts user to avoid or correct conditions that could cause bodily injury.

CAUTION: Alerts user to avoid or correct conditions that couldcause damage toor destruction of equipment.

NOTE: Identifies helpful procedures and information.

>.. s .

802-777 3

. .