Graco Inc 800-048, 801-457, 2104ES manual Installation, AT Least 5 GPM 19 LITER/MINI

Page 3

INSTALLATION

Check Electrical Service and Plug In

Before plugging in the sprayer, be sure the electrical service is 1 phase 220V, 60 H A C , 30 Amp. WitKthe ON-OFF switch in the OFF position, plug the power supplycordinto a groundedoutlet.Ifyouusean

extension cord, it must have 3 wires of at least 1 0 gauge (2.5 mm2) and should not be over100ft (30.3

m) long.

Install Wheels and Handle

Slide the axle through the frame. Slide the wheels and washers onto the axle and securein place with cotter pins provided. Install the hubcaps. Attach the handle with thefour screws, flatwashers, lock washers and nuts provided.

l,nstall Hose and Spray Gun

Connect the spray hose to thespray gun by inserting

thepinattheendof the hose intothequick disconnect coupler on the gun. Connect the hose to the fluid outlet in the same way.

- .. .

Remove the tape from the cap on top of the pump.

CleaningAccessories

 

 

$.

 

 

.' i

For sprayingdetergent

or othercleaningsolution,we

 

recommend

using a

chemicalinjectorkit.

See

'

Accessories

andinstructionmanual801-192for

 

installation and operation.

For removing rust andold paint we recommend using a water sandblaster.See Accessoriesand instruction manual 801.190 for installation and operation.

Connect To Water Supply

CAUTION

Beforeattachingtowater supply.checklocal plumbing code regardingcross-connectionto water supply. Backflow check valve 801-133.

Do notexceed 16OoF(7OOC) water temperature to pump in a direct supply system.

Connectahose with atleasta 3 / 4 in. (19 mm) ID

fromyourcitywatersupplytotheunit's 3/4 in. garden hose threaded inlet. The supply hose should not be more than 50 ft. (15 m) long.

NOTE: For adirectsupply system,your water source at theunit must have aflow rate of

AT LEAST 5 GPM (19 LITER/MINI.

If your operating conditions are different fromabove. contactourCustomerServiceDepartmentfor

assistance.

Image 3
Contents Model 800-048 Series a ~NJECTOQIMHAZARD AT Least 5 GPM 19 LITER/MINI InstallationWastedfuelandincreasedwearonpartsandwillvoid DONOTtrytoadjusttheunloadervalveorchangetheOperation WarmingSolution Pumping Section Photo 1Torqueallfour4bltsto240ir-lb 27 Nm Photo801-457 ~3/8~NPT 6 x 30 mmItems~~51-66 NPT x/23-1ESCRlPTlON Parts ListService @ Partslist151 Water Sandblaster 800 1 Adjustable Sand Saver 801 Technical DataChemicalinjector KIT 800

800-048, 801-457, 2104ES specifications

Graco Inc, a renowned manufacturer in the field of fluid handling systems, offers an impressive range of products tailored for various industrial needs. Among its notable offerings is the Graco 2104ES, known for its innovative design and exceptional performance. This versatile unit is specifically engineered to meet the demands of various industries, including automotive, construction, and manufacturing.

The Graco 2104ES stands out due to its remarkable features that enhance efficiency and productivity. One of its primary characteristics is the incorporation of advanced technology, such as the ProConnect system, which allows for quick and easy changes of components without the need for specialized tools. This feature significantly reduces downtime during maintenance, ensuring that operations remain smooth and uninterrupted.

Another key attribute of the Graco 2104ES is its compatibility with a wide range of materials, including adhesives, sealants, and coatings. This flexibility makes it an ideal choice for diverse applications, enabling users to tackle different projects without needing multiple equipment types. The design of the unit also emphasizes user-friendliness, incorporating intuitive controls that facilitate effortless operation by both experienced professionals and newcomers alike.

In terms of performance, the Graco 2104ES is equipped with a powerful motor that delivers consistent pressure and flow rates, ensuring efficient material distribution. This aspect is particularly beneficial in high-demand environments where precision is critical to delivering quality results. The robust construction of the unit also contributes to its durability, allowing it to withstand the rigors of daily use in industrial settings.

Moreover, Graco has integrated safety features into the 2104ES, prioritizing the well-being of operators. The inclusion of pressure relief valves and automatic shut-off systems minimizes risks associated with misuse or malfunction.

Similar in excellence are the Graco models 801-457 and 800-048, designed to complement the 2104ES. The 801-457 model is notable for its lightweight design, extending portability without compromising performance. Meanwhile, the 800-048 model emphasizes versatility, supporting a wider range of attachments and accessories for different applications.

In summary, Graco Inc offers a powerful trio of fluid handling solutions in the 2104ES, 801-457, and 800-048 models. With innovative technologies, user-friendly features, and a strong focus on safety and durability, these products are essential for any industrial operation seeking reliability and efficiency.